DSPIC30F3014_13 Datasheet, PDF (178/228 Pages) Microchip Technology – High-Performance,16-bit Digital Signal Controllers

dsPIC30F3014/4013
TABLE 23-9: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
VOL
Output Low Voltage⁽²⁾
DO10
I/O Ports
—
— 0.6
V IOL = 8.5 mA, VDD = 5V
—
— 0.15 V IOL = 2.0 mA, VDD = 3V
DO16
OSC2/CLKO
—
— 0.6
V IOL = 1.6 mA, VDD = 5V
(RC or EC Oscillator mode)
VOH
Output High Voltage⁽²⁾
—
— 0.72 V IOL = 2.0 mA, VDD = 3V
DO20
I/O Ports
VDD – 0.7 — —
V IOH = -3.0 mA, VDD = 5V
VDD – 0.2 — —
V IOH = -2.0 mA, VDD = 3V
DO26
OSC2/CLKO
VDD – 0.7 — —
V IOH = -1.3 mA, VDD = 5V
(RC or EC Oscillator mode) VDD – 0.1 — —
V IOH = -2.0 mA, VDD = 3V
Capacitive Loading Specs
on Output Pins⁽²⁾
DO50 COSC2 OSC2/SOSC2 Pin
—
— 15 pF In XTL, XT, HS and LP modes
when external clock is used to
drive OSC1.
DO56 CIO
DO58 CB
All I/O Pins and OSC2
SCL, SDA
—
— 50 pF RC or EC Oscillator mode
—
— 400 pF In I²C mode
Note 1: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: These parameters are characterized but not tested in manufacturing.
FIGURE 23-1:
LOW-VOLTAGE DETECT CHARACTERISTICS
VDD
LV10
LVDIF
(LVDIF set by hardware)
DS70138G-page 178
 2010 Microchip Technology Inc.