DSPIC30F2010 Datasheet, PDF (170/203 Pages) Microchip Technology – High-Performance, 16-Bit Digital Signal Controllers

dsPIC30F2010
FIGURE 22-12: MOTOR CONTROL PWM MODULE FAULT TIMING CHARACTERISTICS
FLTA/B
PWMx
MP30
MP20
FIGURE 22-13:
MOTOR CONTROL PWM MODULE TIMING CHARACTERISTICS
MP11 MP10
PWMx
Note: Refer to Figure 22-2 for load conditions.
TABLE 22-29: MOTOR CONTROL PWM MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristic⁽¹⁾
Min Typ⁽²⁾ Max Units
Conditions
MP10 TFPWM PWM Output Fall Time —
—
—
ns ^{See parameter D032}
MP11 TRPWM PWM Output Rise Time —
—
—
ns See parameter D031
MP20 ^TFD
Fault Input ↓ to PWM
—
—
50
ns —
I/O Change
MP30 TFH
Minimum Pulse Width 50
—
—
ns —
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
DS70118G-page 168
© 2006 Microchip Technology Inc.