|
UPD1001 Datasheet, PDF (1/42 Pages) Microchip Technology – USB Power Delivery Controller | |||
|
UPD1001
USB Power Delivery Controller
Highlights
⢠Integrated USB Power Delivery (PD) PHY
⢠Support for Power Delivery Message Protocol
⢠Integrated Voltage and Current ADC Inputs
⢠Configuration Profile Selection
⢠On-chip Microcontroller
⢠SPI Interface
⢠Commercial and Industrial Grade Temperature
Support
⢠Available in 32-SQFN Package
Target Applications
⢠AC Adapters & Chargers
- Type-A
- Type-B
- Micro-A
- Micro-B
- Captive cable
Key Benefits
⢠Integrated USB Power Delivery (PD) PHY
- Integrated receive termination
- Requires minimal external components
⢠Support for Power Delivery Message Protocol
- Message Generation/Consumption
- Retry Generation
- Error Handling
- State Behavior
⢠Cable Detect Logic
- Cable attachment type
⢠CFG_SEL pins allow selection of multiple profiles
- Provider
- Consumer/Provider
⢠Integrated Voltage (VMON) and Current (IMON)
ADC Inputs
⢠Dead Battery Support
⢠On-chip Microcontroller
- Manages I/Os and other signals
- Implements power delivery policy engine and
device policy manager
⢠Configuration Programming via OTP, or Vendor
Defined Messaging
⢠Supports Low Power Modes
⢠Serial Peripheral Interface (SPI) Bus
⢠Internal 3.3 V and 1.8 V Voltage Regulators
⢠Integrated Oscillator Reduces BOM Costs
⢠Package
- 32-pin SQFN (5 x 5 mm)
⢠Environmental
- Commercial temperature range (0°C to +70°C)
- Industrial temperature range (-40°C to +85°C
ï£ 2014 Microchip Technology Inc.
DS00001759B-page 1
|
▷ |