|
TC7126_13 Datasheet, PDF (1/28 Pages) Microchip Technology – 3-1/2 Digit Analog-to-Digital Converters | |||
|
TC7126/A
3-1/2 Digit Analog-to-Digital Converters
Features:
⢠Internal Reference with Low Temperature Drift:
- TC7126: 80ppm/°C, Typical
- TC7126A: 35ppm/°C, Typical
⢠Zero Reading with Zero Input
⢠Low Noise: 15ïVP-P
⢠High Resolution: 0.05%
⢠Low Input Leakage Current: 1pA Typ., 10pA Max.
⢠Precision Null Detectors with True Polarity at Zero
⢠High-Impedance Differential Input
⢠Convenient 9V Battery Operation with Low-Power
Dissipation: 500ïW Typ., 900ïW Max.
Applications:
⢠Thermometry
⢠Bridge Readouts: Strain Gauges, Load Cells,
Null Detectors
⢠Digital Meters and Panel Meters:
- Voltage/Current/Ohms/Power, pH
⢠Digital Scales, Process Monitors
Device Selection Table
Package
Code
Package
Temperature
Range
CPL
IPL
CKW
CLW
40-Pin PDIP
40-Pin PDIP (TC7126 Only)
44-Pin PQFP
44-Pin PLCC
0ï°C to +70ï°C
-25ï°C to +85ï°C
0ï°C to +70ï°C
0ï°C to +70ï°C
General Description:
The TC7126A is a 3-1/2 digit CMOS Analog-to-Digital
Converter (ADC) containing all the active components
necessary to construct a 0.05% resolution measure-
ment system. Seven-segment decoders, digit and
polarity drivers, voltage reference, and clock circuit are
integrated on-chip. The TC7126A directly drives a
Liquid Crystal Display (LCD), and includes a backplane
driver.
A low-cost, high resolution indicating meter requires
only a display, four resistors, and four capacitors. The
TC7126Aâs extremely low-power drain and 9V battery
operation make it ideal for portable applications.
The TC7126A reduces linearity error to less than 1
count. Rollover error (the difference in readings for
equal magnitude, but opposite polarity input signals) is
below ±1 count. High-impedance differential inputs
offer 1pA leakage current and a 1012ï input imped-
ance. The 15ïVP-P noise performance ensures a ârock
solidâ reading, and the auto-zero cycle ensures a zero
display reading with a 0V input.
The TC7126A features a precision, low drift internal
voltage reference and is functionally identical to the
TC7126. A low drift external reference is not normally
required with the TC7126A.
ï£ 2002-2012 Microchip Technology Inc.
DS21458D-page 1
|
▷ |