|
TC7116_13 Datasheet, PDF (1/26 Pages) Microchip Technology – 3-1/2 Digit Analog-to-Digital Converters with Hold | |||
|
TC7116/A/TC7117/A
3-1/2 Digit Analog-to-Digital Converters with Hold
Features:
⢠Low Temperature Drift Internal Reference:
- TC7116/TC7117 80 ppm/°C, Typ.
- TC7116A/TC7117A 20 ppm/°C, Typ.
⢠Display Hold Function
⢠Directly Drives LCD or LED Display
⢠Zero Reading with Zero Input
⢠Low Noise for Stable Display:
- 2V or 200mV Full Scale Range (FSR)
⢠Auto-Zero Cycle Eliminates Need for Zero
⢠Adjustment Potentiometer
⢠True Polarity Indication for Precision Null
Applications
⢠Convenient 9V Battery Operation:
(TC7116/TC7116A)
⢠High-Impedance CMOS Differential Inputs: 1012ï
⢠Low-Power Operation: 10mW
Applications:
⢠Thermometry
⢠Bridge Readouts: Strain Gauges, Load Cells,
Null Detectors
⢠Digital Meters: Voltage/Current/Ohms/Power, pH
⢠Digital Scales, Process Monitors
⢠Portable Instrumentation
Device Selection Table
Package Code
Package
Temperature Range
CPL
IJL
CKW
CLW
40-Pin PDIP
40-Pin CERDIP
44-Pin PQFP
44-Pin PLCC
0ï°C to +70ï°C
-25ï°C to +85ï°C
0ï°C to +70ï°C
0ï°C to +70ï°C
General Description:
The TC7116A/TC7117A are 3-1/2 digit CMOS Analog-
to-Digital Converters (ADCs) containing all the active
components necessary to construct a 0.05% resolution
measurement system. Seven-segment decoders,
polarity and digit drivers, voltage reference, and clock
circuit are integrated on-chip. The TC7116A drives
Liquid Crystal Displays (LCDs) and includes a back-
plane driver. The TC7117A drives common anode Light
Emitting Diode (LED) displays directly with an 8mA
drive current per segment.
These devices incorporate a display hold (HLDR)
function. The displayed reading remains indefinitely, as
long as HLDR is held high. Conversions continue, but
output data display latches are not updated. The refer-
ence low input (VREF-) is not available, as it is with the
TC7106/7107. VREF- is tied internally to analog
common in the TC7116A/7117A devices.
The TC7116A/7117A reduces linearity error to less
than 1 count. Rollover error (the difference in readings
for equal magnitude but opposite polarity input signals)
is below ±1 count. High-impedance differential inputs
offer 1pA leakage current and a 1012ï input imped-
ance. The 15ïVP-P noise performance enables a ârock
solidâ reading. The auto-zero cycle ensures a zero
display reading with a 0V input.
The TC7116A and TC7117A feature a precision, low
drift internal reference, and are functionally identical to
the TC7116/TC7117. A low drift external reference is
not normally required with the TC7116A/TC7117A.
ï£ 2002-2012 Microchip Technology Inc.
DS21457D-page 1
|
▷ |