|
TC1221_14 Datasheet, PDF (1/16 Pages) Microchip Technology – High-Frequency Switched Capacitor Voltage Converters with Shutdown in SOT Packages | |||
|
Obsolete Device
TC1221/TC1222
High-Frequency Switched Capacitor Voltage Converters
with Shutdown in SOT Packages
Features:
⢠Charge Pumps in 6-Pin SOT-23A Package
⢠96% Voltage Conversion Efficiency
⢠Voltage Inversion and/or Doubling
⢠Operates from +1.8V to +5.5V
⢠Up to 25mA Output Current
⢠Only Two External Capacitors Required
⢠Power-Saving Shutdown Mode
⢠Fully Compatible with 1.8V Logic Systems
Applications:
⢠LCD Panel Bias
⢠Cellular Phones
⢠Pagers
⢠PDAs, Portable Data Loggers
⢠Battery-Powered Devices
Device Selection Table
Part
Number
Package
Osc.
Freq.
(kHz)
Operating
Temp.
Range
TC1221ECH 6-Pin SOT-23A 125 -40°C to +85°C
TC1222ECH 6-Pin SOT-23A 750 -40°C to +85°C
Package Type
6-Pin SOT-23A
C+ SHDN GND
6
5
4
TC1221ECH
TC1222ECH
1
2
3
OUT VIN
Câ
NOTE: 6-Pin SOT-23A is equivalent to the EIAJ SC-74
General Description:
The TC1221/TC1222 are CMOS âcharge-pumpâ
voltage converters in ultra-small 6-Pin SOT-23A
packages. They invert and/or double an input voltage
which can range from +1.8V to +5.5V. Conversion
efficiency is typically 96%. Switching frequency is 125
kHz for the TC1221, 750 kHz for the TC1222. When the
shutdown pin is held at a logic low, the device goes into
a very low power mode of operation, consuming less
than 1ïA of supply current.
For standard voltage inverter applications, the device
requires only two external capacitors. With a few
additional components a positive doubler can also be
built. All other circuitry, including control, oscillator,
power MOSFETs are integrated on-chip. Typical supply
currents are 290ïA (TC1221) and 1800ïA (TC1222).
All devices are available in 6-pin SOT-23A surface
mount packages.
Functional Block Diagram
Negative Voltage Inverter
C+
VIN
+
C1
TC1221
TC1222
Câ
SHDN
Input
ON
OFF
GND
OUT
C2
+
Vâ
Output
ï£ 2002-2014 Microchip Technology Inc.
DS20001367C-page 1
|
▷ |