|
PIC16F1782_12 Datasheet, PDF (1/450 Pages) Microchip Technology – 28-Pin 8-Bit Advanced Analog Flash Microcontroller | |||
|
PIC16(L)F1782/3
28-Pin 8-Bit Advanced Analog Flash Microcontroller
High-Performance RISC CPU:
⢠Only 49 Instructions
⢠Operating Speed:
- DC â 32 MHz clock input
- DC â 125 ns instruction cycle
⢠Interrupt Capability with Automatic Context
Saving
⢠16-Level Deep Hardware Stack with optional
Overflow/Underflow Reset
⢠Direct, Indirect and Relative Addressing modes:
⢠Two full 16-bit File Select Registers (FSRs)
- FSRs can read program and data memory
Memory Features:
⢠Up to 4 KW Flash Program Memory:
- Self-programmable under software control
- Programmable code protection
- Programmable write protection
⢠256 Bytes of Data EEPROM
⢠Up to 512 Bytes of RAM
High Performance PWM Controller:
⢠Two Programmable Switch Mode Controller
(PSMC) modules:
- Digital and/or analog feedback control of
PWM frequency and pulse begin/end times
- 16-bit Period, Duty Cycle and Phase
- 16 ns clock resolution
- Supports Single PWM, Complementary,
Push-Pull and 3-phase modes of operation
- Dead-band control with 8-bit counter
- Auto-shutdown and restart
- Leading and falling edge blanking
- Burst mode
Extreme Low-Power Management
PIC16LF1782/3 with XLP:
⢠Sleep mode: 50 nA @ 1.8V, typical
⢠Watchdog Timer: 500 nA @ 1.8V, typical
⢠Secondary Oscillator: 500 nA @ 32 kHz
⢠Operating Current:
- 8 ïA @ 32 kHz, 1.8V, typical
- 32 ïA/MHz @ 1.8V, typical
Analog Peripheral Features:
⢠Analog-to-Digital Converter (ADC):
- Fully differential 12-bit converter
- Up to 75 ksps conversion rate
- 11 single-ended channels
- 5 differential channels
- Positive and negative reference selection
⢠8-bit Digital-to-Analog Converter (DAC):
- Output available externally
- Positive and negative reference selection
- Internal connections to comparators, op
amps, Fixed Voltage Reference (FVR) and
ADC
⢠Three High-Speed Comparators:
- 50 ns response time @ VDD = 5V
- Rail-to-rail inputs
- Software selectable hysteresis
- Internal connection to op amps, FVR and
DAC
⢠Two Operational Amplifiers:
- Rail-to-rail inputs/outputs
- High/Low selectable Gain Bandwidth Product
- Internal connection to DAC and FVR
⢠Fixed Voltage Reference (FVR):
- 1.024V, 2.048V and 4.096V output levels
- Internal connection to ADC, comparators and
DAC
ï£ 2011-2012 Microchip Technology Inc.
Preliminary
DS41579D-page 1
|
▷ |