PIC12LF1501 Datasheet, PDF (1/10 Pages) Microchip Technology – 8/14/20-Pin, 8-Bit Flash Microcontrollers Product Brief

PIC12(L)F1501/PIC16(L)F150X
8/14/20-Pin, 8-Bit Flash Microcontrollers Product Brief
High-Performance RISC CPU:
• C Compiler Optimized Architecture
• Only 49 Instructions
• Up to 14 Kbytes Linear Program Memory
Addressing
• Up to 512 bytes Linear Data Memory Addressing
• Operating Speed:
- DC – 20 MHz clock input
- DC – 125 ns instruction cycle
• Interrupt Capability with Automatic Context
Saving
• 16-Level Deep Hardware Stack with Optional
Overflow/Underflow Reset
• Direct, Indirect and Relative Addressing modes:
- Two full 16-bit File Select Registers (FSRs)
- FSRs can read program and data memory
Flexible Oscillator Structure:
• 16 MHz Internal Oscillator Block:
- Factory calibrated to ±1%, typical
- Software selectable frequency range from
16 MHz to 31 kHz
• 31 kHz Low-Power Internal Oscillator
• Three External Clock modes up to 20 MHz
Special Microcontroller Features:
• Operating Voltage Range:
- 1.8V to 3.6V (PIC12LF1501/PIC16LF150X)
- 2.3V to 5.5V (PIC12F1501/PIC16F150X)
• Self-Programmable under Software Control
• Power-on Reset (POR)
• Power-up Timer (PWRT)
• Programmable Low-Power Brown-Out Reset
(LPBOR)
• Extended Watchdog Timer (WDT):
- Programmable period from 1 ms to 256s
• Programmable Code Protection
• In-Circuit Serial Programming™ (ICSP™) via Two
Pins
• Enhanced Low-Voltage Programming (LVP)
• Power-Saving Sleep mode:
- Low-Power Sleep mode
- Low-Power BOR (LPBOR)
• Integrated Temperature Indicator
Low-Power Features
(PIC12LF1501/PIC16LF150X):
• Standby Current:
- 20 nA @ 1.8V, typical
• Watchdog Timer Current:
- 300 nA @ 1.8V, typical
• Operating Current:
- 30 A/MHz @ 1.8V, typical
• Timer1 Oscillator:
- 600 nA @ 32 kHz, 1.8V, typical
(PIC16LF1508/09 devices only)
Peripheral Features:
• Analog-to-Digital Converter (ADC):
- 10-bit resolution
- Up to 12 external channels
- 2 internal channels:
- Fixed Voltage Reference channel
- Temperature Indicator channel
- Auto acquisition capability
- Conversion available during Sleep
• Up to 2 Comparators:
- Rail-to-rail inputs
- Power mode control
- Software controllable hysteresis
• Voltage Reference module:
- Fixed Voltage Reference (FVR) with 1.024V,
2.048V and 4.096V output levels
- Up to 1 rail-to-rail resistive 5-bit DAC with
positive and negative reference selection
• Up to 17 I/O Pins and 1 Input-only Pin:
- High current sink/source 25 mA/25 mA
- Individually programmable weak pull-ups
- Individually programmable interrupt-on-
change (IOC) pins
• Timer0: 8-Bit Timer/Counter with 8-Bit
Programmable Prescaler
• Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Gate Input mode
• Timer2: 8-Bit Timer/Counter with 8-Bit Period
Register, Prescaler and Postscaler
• Four 10-bit PWM modules
• Up to 1 Master Synchronous Serial Port (MSSP)
with SPI and I²C™ with:
- 7-bit address masking
- SMBus/PMBus™ compatibility
• Up to 1 Enhanced Universal Synchronous Asyn-
chronous Receiver Transmitter (EUSART):
- RS-232, RS-485 and LIN compatible
 2011 Microchip Technology Inc.
Advance Information
DS41454C-page 1