PIC10F222-IP Datasheet, PDF (1/6 Pages) Microchip Technology – PIC10F220/222 Rev. A Silicon Errata

PIC10F220/222
PIC10F220/222 Rev. A Silicon Errata
The PIC10F220/222 parts you have received conform
functionally to the Device Data Sheet (DS41270B),
except for the anomalies described below.
All issues listed here will be addressed in future
revisions of the PIC10F220/222 silicon. Where noted,
problems apply to listed revision only.
1. Module: Analog-to-Digital (A/D)
Converter
PIC10F220/222 silicon Rev. A1. The A/D Converter
does not meet the design target. The specifications
listed below in Table 10-6 supersede Table 10-6 in
DS41270B.
TABLE 10-6: A/D CONVERTER CHARACTERISTICS AT 8 BITS
Param
No.
Sym
Characteristic
Min
Typ†
Max
Units
Conditions
A03
EIL Integral Error
—
—
±2
Lsb VDD = 5.0V 25°C
A04
EDL Differential Error
—
—
-1≤ EDL ≤2 Lsb VDD = 5.0V 25°C
A06
EOFF Offset Error
—
—
±2
LSb VDD = 5.0V 25°C
A07
EGN Gain Error
A10
— Monotonicity
—
—
—
not warranted⁽¹⁾
±2
LSb VDD = 5.0V 25°C
—
— VSS ≤ VAIN ≤ VDD
* These parameters are characterized but not tested.
† Data in the “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design
guidance only are not tested.
Note 1: This will be addressed in future silicon revisions.
© 2006 Microchip Technology Inc.
DS80271A-page 1