|
MCP73861_13 Datasheet, PDF (1/34 Pages) Microchip Technology – Advanced Single or Dual Cell, Fully Integrated Li-Ion/Li-Polymer Charge Management Controllers | |||
|
MCP73861/2/3/4
Advanced Single or Dual Cell, Fully Integrated Li-Ion/Li-Polymer
Charge Management Controllers
Features:
⢠Linear Charge Management Controllers:
- Integrated Pass Transistor
- Integrated Current Sense
- Reverse-Blocking Protection
⢠High-Accuracy Preset Voltage Regulation: + 0.5%
⢠Four Selectable Voltage Regulation Options:
- 4.1V, 4.2V â MCP73861/3
- 8.2V, 8.4V â MCP73862/4
⢠Programmable Charge Current: 1.2A Maximum
⢠Programmable Safety Charge Timers
⢠Preconditioning of Deeply Depleted Cells
⢠Automatic End-of-Charge Control
⢠Optional Continuous Cell Temperature Monitoring
⢠Charge Status Output for Direct LED Drive
⢠Fault Output for Direct LED Drive
⢠Automatic Power-Down
⢠Thermal Regulation
⢠Temperature Range: -40°C to +85°C
⢠Packaging: 16-Pin, 4 x 4 QFN
16-Pin SOIC
Applications:
⢠Lithium-Ion/Lithium-Polymer Battery Chargers
⢠Personal Data Assistants (PDAs)
⢠Cellular Telephones
⢠Hand-Held Instruments
⢠Cradle Chargers
⢠Digital Cameras
⢠MP3 Players
Description:
The MCP7386X family of devices features highly
advanced linear charge management controllers for
use in space-limited, cost-sensitive applications. The
devices combine high-accuracy, constant voltage and
current regulation, cell preconditioning, cell
temperature monitoring, advanced safety timers,
automatic charge termination, internal current sensing,
reverse-blocking protection, charge status and fault
indication in either a space-saving 16-pin 4 x 4 QFN
package, or a 16-pin SOIC package. The MCP7386X
provides a complete, fully functional, stand-alone
charge management solution with a minimum number
of external components.
The MCP73861/3 is intended for applications utilizing
single-cell Lithium-Ion or Lithium-Polymer battery
packs, while the MCP73862/4 is intended for dual
series cell Lithium-Ion or Lithium-Polymer battery
packs. The MCP73861/3 has two selectable
voltage-regulation options available (4.1V and 4.2V),
for use with either coke or graphite anodes and operate
with an input voltage range of 4.5V to 12V. The
MCP73862/4 has two selectable voltage-regulation
options available (8.2V and 8.4V), for use with coke or
graphite anodes, and operate with an input voltage
range of 8.7V to 12V.
The MCP73861/2 and MCP73863/4 differ only in the
function of the charge status output (STAT1) when a
charge cycle has been completed. The MCP73861/2
flashes the output, while the MCP73863/4 turns the
output off. Refer to Section 5.2.1 âCharge Status
Outputs (STAT1, STAT2)â.
The MCP7386X family of devices are fully specified
over the ambient temperature range of -40°C to +85°C.
ï£ 2004-2013 Microchip Technology Inc.
DS21893F-page 1
|
▷ |