|
MCP3201 Datasheet, PDF (1/20 Pages) Microchip Technology – 2.7V 12-Bit A/D Converter with SPI Serial Interface | |||
|
MCP3201
2.7V 12-Bit A/D Converter with SPI® Serial Interface
FEATURES
⢠12-bit resolution
⢠±1 LSB max DNL
⢠±1 LSB max INL (MCP3201-B)
⢠±2 LSB max INL (MCP3201-C)
⢠On-chip sample and hold
⢠SPI® serial interface (modes 0,0 and 1,1)
⢠Single supply operation: 2.7V - 5.5V
⢠100ksps max. sampling rate at VDD = 5V
⢠50ksps max. sampling rate at VDD = 2.7V
⢠Low power CMOS technology
- 500nA typical standby current, 2µA max.
- 400µA max. active current at 5V
⢠Industrial temp range: -40°C to +85°C
⢠8-pin PDIP, SOIC and TSSOP packages
APPLICATIONS
⢠Sensor Interface
⢠Process Control
⢠Data Acquisition
⢠Battery Operated Systems
DESCRIPTION
The Microchip Technology Inc. MCP3201 is a succes-
sive approximation 12-bit Analog-to-Digital (A/D) Con-
verter with on-board sample and hold circuitry. The
device provides a single pseudo-differential input. Dif-
ferential Nonlinearity (DNL) is specified at ±1 LSB, and
Integral Nonlinearity (INL) is offered in ±1 LSB
(MCP3201-B) and ±2 LSB (MCP3201-C) versions.
Communication with the device is done using a simple
serial interface compatible with the SPI protocol. The
device is capable of sample rates of up to 100ksps at a
clock rate of 1.6MHz. The MCP3201 operates over a
broad voltage range (2.7V - 5.5V). Low current design
permits operation with typical standby and active cur-
rents of only 500nA and 300µA, respectively. The
device is offered in 8-pin PDIP, TSSOP and 150mil
SOIC packages.
PACKAGE TYPES
PDIP
VREF 1
IN+ 2
INâ 3
VSS 4
SOIC, TSSOP
8 VDD
7 CLK
6 DOUT
5 CS/SHDN
VREF
1
IN+ 2
INâ 3
VSS 4
8
VDD
7 CLK
6
DOUT
5 CS/SHDN
FUNCTIONAL BLOCK DIAGRAM
VREF
VDD VSS
IN+ Sample
and
IN-
Hold
DAC
Comparator
12-Bit SAR
Control Logic
Shift
Register
CS/SHDN CLK
DOUT
© 1999 Microchip Technology Inc.
Preliminary
DS21290B-page 1
|
▷ |