|
MCP23009-E Datasheet, PDF (1/50 Pages) Microchip Technology – 8-Bit I/O Expander with Open-Drain Outputs | |||
|
MCP23009/MCP23S09
8-Bit I/O Expander with Open-Drain Outputs
Features
⢠8-bit remote bidirectional I/O port:
- I/O pins default to input
⢠Open-drain outputs:
- 5.5V tolerant
- 25 mA sink capable (per pin)
- 200 mA total
⢠High-speed I2C⢠interface: (MCP23009)
- 100 kHz
- 400 kHz
- 3.4 MHz
⢠High-speed SPI interface: (MCP23S09)
- 10 MHz
⢠Single hardware address pin: (MCP23009)
- Voltage input to allow up to eight devices on
the bus
⢠Configurable interrupt output pins:
- Configurable as active-high, active-low or
open-drain
Block Diagram
CS
SCK
SI
SO
MCP23S09
SPI
⢠Configurable interrupt source:
- Interrupt-on-change from configured defaults
or pin change
⢠Polarity inversion register to configure the polarity
of the input port data
⢠External reset input
⢠Low standby current:
- 1 µA (-40°C ⤠TA ⤠+85°C)
- 6 µA (+85°C ⤠TA ⤠+125°C)
⢠Operating voltage:
- 1.8V to 5.5V
Packages
16-pin QFN (3x3 [mm])
18-pin PDIP (300 mil)
18-pin SOIC (300 mil)
20-pin SSOP
SCL
SDA
RESET
INT
ADDR
MCP23009
I2C
Serializer/
Deserializer
Multi-bit
Decode
8
Control
8
Configuration/
Control
Registers
GPIO
GP0
GP1
GP2
GP3
GP4
GP5
GP6
GP7
© 2009 Microchip Technology Inc.
DS22121B-page 1
|
▷ |