|
MCP2200 Datasheet, PDF (1/34 Pages) Microchip Technology – USB 2.0 to UART Protocol Converter with GPIO | |||
|
MCP2200
USB 2.0 to UART Protocol Converter with GPIO
Features
Universal Serial Bus (USB)
⢠Supports full-speed USB (12 Mb/s)
⢠Implements USB protocol composite device CDC
device for communications, configuration and I/O
control
⢠128 byte buffer to handle data throughput at any
UART baud rate:
- 64 byte transmit
- 64 byte receive
⢠Fully configurable VID and PID assignments, and
string descriptors
⢠Bus powered or self-powered
⢠USB 2.0 Compliant (certification #: TBD)
USB Driver and Software Support
⢠Uses standard Microsoft® Windows® drivers for
Virtual Com Port (VCP):
- Windows XP(SP2 and later)/Vista/7
⢠Configuration utility for initial configuration
Universal Asynchronous Receiver/Transmitter
(UART)
⢠Responds to SET LINE CODING commands to
dynamically change baud rates
⢠Supports baud rates: 300-1000k
⢠Hardware flow control
⢠UART signal polarity option
General Purpose Input/Output (GPIO) Pins
⢠Eight (8) general purpose I/O pins
EEPROM
⢠256 bytes of user EEPROM
Other
⢠USB activity LED outputs (TxLED and RxLED)
⢠SSPND output pin
⢠USBCFG output pin (indicates if requested
current is allowed)
⢠Operating voltage: 3.0-5.5V
⢠Oscillator input: 12 MHz
⢠ESD protection > 4 kV HBM
⢠Industrial (I) Operating Temperature: -40°C to
+85°C
Package Types
The device will be offered in the following packages:
⢠20-lead QFN (5 x 5[mm])
⢠20-lead SOIC
⢠20-lead SSOP
MCP2200
SOIC, SSOP
VDD 1
OSC1 2
OSC2 3
RST 4
GP7/TxLED 5
GP6/RxLED 6
GP5 7
GP4 8
GP3 9
TX 10
20 VSS
19 D+
18 D-
17 VUSB
16 GP0/SSPND
15 GP1/USBCFG
14 GP2
13 CTS
12 RX
11 RTS
MCP2200
5x5 QFN*
20 19 18 17 16
RST 1
15 D-
GP7/TxLED 2
GP6/RxLED 3
GP5 4
EP
14 VUSB
21
13 GP0/SSPND
12 GP1/USBCFG
GP4 5
11 GP2
6 7 8 9 10
* Includes Exposed Thermal Pad (EP); see Table 1-1.
ï£ 2010 Microchip Technology Inc.
DS22228A-page 1
|
▷ |