|
MCP16251 Datasheet, PDF (1/34 Pages) Microchip Technology – Low Quiescent Current, PFM/PWM Synchronous Boost Regulator | |||
|
MCP16251/2
Low Quiescent Current, PFM/PWM Synchronous Boost Regulator
with True Output Disconnect or Input/Output Bypass Option
Features:
⢠Up to 96% Typical Efficiency
⢠650 mA Typical Peak Input Current Limit:
- IOUT > 100 mA @ 3.3V VOUT, 1.2V VIN
- IOUT > 250 mA @ 3.3V VOUT, 2.4V VIN
- IOUT > 225 mA @ 5.0V VOUT, 3.3V VIN
⢠Low Device Quiescent Current:
- Output Quiescent Current: < 4 µA typical, ï
device is not switching (VOUT > VIN,
excluding feedback divider current)
- Input Sleep Current: 1 µA
- No Load Input Current: 14 µA typical
⢠Shutdown Current: 0.6 µA typical
⢠Low Start-up Voltage: 0.82V, 1 mA load
⢠Low Operating Input Voltage: down to 0.35V
⢠Adjustable Output Voltage Range: 1.8V to 5.5V
⢠Maximum Input Voltage ï£ VOUT < 5.5V
⢠Automatic PFM/PWM Operation:
- PWM Operation: 500 kHz
- PFM Output Ripple: 150 mV typical
⢠Feedback voltage: 1.23V
⢠Internal Synchronous Rectifier
⢠Internal Compensation
⢠Inrush Current Limiting and Internal Soft Start
(1.5 ms typical)
⢠Selectable, Logic Controlled, Shutdown States:
- True Load Disconnect Option (MCP16251)
- Input to Output Bypass Option (MCP16252)
⢠Anti-Ringing Control
⢠Overtemperature Protection
⢠Available Packages:
- SOT-23-6
- 2 x 3 8-Lead TDFN
Applications:
⢠One, Two and Three Cell Alkaline and NiMH/NiCd
Portable Products
⢠Solar Cell Applications
⢠Personal Care and Medical Products
⢠Bias for Status LEDs
⢠Smartphones, MP3 Players, Digital Cameras
⢠Remote controllers, Portable Instruments
⢠Wireless Sensors
⢠Bluetooth Headsets
⢠+3.3V to +5.0V Distributed Power Supply
General Description
The MCP16251/2 is a compact, high-efficiency, fixed
frequency, synchronous step-up DC-DC converter.
This family of devices provides an easy-to-use power
supply solution for applications powered by either
one-cell, two-cell or three-cell alkaline, NiCd, NiMH,
one-cell Li-Ion or Li-Polymer batteries.
A low-voltage technology allows the regulator to start
up without high inrush current or output voltage
overshoot from a low voltage input. High efficiency is
accomplished by integrating the low-resistance
N-Channel boost switch and synchronous P-Channel
switch. All compensation and protection circuitry are
integrated to minimize external components.
MCP16251/2 operates and consumes less than 14 µA
from battery, while operating at no load (VOUT = 3.3V,
VIN = 1.5V). The devices provide a true disconnect
from input to output (MCP16251) or an input-to-output
bypass (MCP16252), while in shutdown (EN = GND).
Both options consume less than 0.6 µA from battery.
Output voltage is set by a small external resistor
divider. Two package options, SOT-23-6 and
2 x 3 TDFN-8, are available.
Package Types
MCP16251/2
6-Lead SOT-23
MCP16251/2
2x3 TDFN*
SW 1
GND 2
EN 3
6 VIN VFB 1
8 VIN
5 VOUT SGND 2
4 VFB
PGND 3
EN 4
EP
9
7 VOUTS
6 VOUTP
5 SW
* Includes Exposed Thermal Pad (EP); see Table 3-1.
ï£ 2013 Microchip Technology Inc.
DS25173A-page 1
|
▷ |