MCP14A0153_15 Datasheet, PDF (1/30 Pages) Microchip Technology – 1.5A Dual MOSFET Driver with Low Threshold Input And Enable

MCP14A0153/4/5
1.5A Dual MOSFET Driver
with Low Threshold Input And Enable
Features
• High Peak Output Current: 1.5A (typical)
• Wide Input Supply Voltage Operating Range:
- 4.5V to 18V
• Low Shoot-Through/Cross-Conduction Current in
Output Stage
• High Capacitive Load Drive Capability:
- 1000 pF in 11.5 ns (typical)
• Short Delay Times: 25 ns (t_D1), 24 ns (t_D2) (typical)
• Low Supply Current: 750 µA (typical)
• Low-Voltage Threshold Input and Enable with
Hysteresis
• Latch-Up Protected: Withstands 500 mA Reverse
Current
• Space-Saving Packages:
- 8-Lead MSOP
- 8-Lead SOIC
- 8-Lead 2x3 TDFN
Applications
• Switch Mode Power Supplies
• Pulse Transformer Drive
• Line Drivers
• Level Translator
• Motor and Solenoid Drive
Package Types
MSOP/SOIC
MCP14A0153
MCP14A0155
MCP14A0154
EN A 1
IN A 2
GND 3
IN B ⁴
8 EN B
7 OUT A
6 V_DD
5 _{OUT B}
OUT A
OUT B
OUT A
OUT B
General Description
The MCP14A0153/4/5 devices are high-speed dual
MOSFET drivers that are capable of providing up to
1.5A of peak current while operating from a single 4.5V
to 18V supply. There are three output configurations
available; dual inverting (MCP14A0153), dual
noninverting (MCP14A0154) and complementary
(MCP14A0155). These devices feature low
shoot-through current, matched rise and fall times, and
short propagation delays which make them ideal for
high switching frequency applications.
The MCP14A0153/4/5 family of devices offer
enhanced control with Enable functionality. The
active-high Enable pins can be driven low to drive the
corresponding outputs of the MCP14A0153/4/5 low,
regardless of the status of the Input pin. An integrated
pull-up resistor allows the user to leave the Enable pins
floating for standard operation.
These devices are highly latch-up resistant under any
condition within their power and voltage ratings. They
can accept up to 500 mA of reverse current being
forced back into their outputs without damage or logic
upset. All terminals are fully protected against
electrostatic discharge (ESD) up to 2 kV (HBM) and
200 V (MM).
2×3 TDFN *
MCP14A0153 MCP14A0155
MCP14A0154
EN A 1
8 EN B
IN A 2 EP 7 OUT A
GND 3 ⁹ 6 V_DD
IN B ⁴
5 _{OUT B}
OUT A
OUT B
OUT A
OUT B
* Includes Exposed Thermal Pad (EP); see Table 3-1.
 2015 Microchip Technology Inc.
DS20005470A-page 1