MCP1415_10 Datasheet, PDF (1/22 Pages) Microchip Technology – Tiny 1.5A, High-Speed Power MOSFET Driver

MCP1415/16
Tiny 1.5A, High-Speed Power MOSFET Driver
Features
• High Peak Output Current: 1.5A (typical)
• Wide Input Supply Voltage Operating Range:
- 4.5V to 18V
• Low Shoot-Through/Cross-Conduction Current in
Output Stage
• High Capacitive Load Drive Capability:
- 470 pF in 13 ns (typical)
- 1000 pF in 20 ns (typical)
• Short Delay Times: 41 ns (t_D1), 48 ns (t_D2)
(typical)
• Low Supply Current:
- With Logic ‘1’ Input - 0.65 mA (typical)
- With Logic ‘0’ Input - 0.1 mA (typical)
• Latch-Up Protected: Will Withstand 500 mA
Reverse Current
• Logic Input Will Withstand Negative Swing Up to
5V
• Space-saving 5L SOT-23 Package
Applications
• Switch Mode Power Supplies
• Pulse Transformer Drive
• Line Drivers
• Level Translator
• Motor and Solenoid Drive
General Description
MCP1415/16 devices are high-speed MOSFET drivers
that are capable of providing 1.5A of peak current. The
inverting or non-inverting single channel output is
directly controlled from either TTL or CMOS (3V to
18V) logic. These devices also feature low shoot-
through current, matched rise and fall time, and short
propagation delays which make them ideal for high
switching frequency applications.
MCP1415/16 devices operate from a single 4.5V to
18V power supply and can easily charge and discharge
1000 pF gate capacitance in under 20 ns (typical).
They provide low enough impedances in both the on
and off states to ensure that the intended state of the
MOSFET will not be affected, even by large transients.
These devices are highly latch-up resistant under any
condition within their power and voltage ratings. They
are not subject to damage when noise spiking (up to
5V, of either polarity) occurs on the ground pin. They
can accept, without damage or logic upset, up to
500 mA of reverse current being forced back into their
outputs. All terminals are fully protected against
Electrostatic Discharge (ESD) up to 2.0 kV (HBM) and
400V (MM).
Package Types:
SOT-23-5
MCP1415 MCP1416
NC ₁
V_{DD 2}
IN 3
5 OUT
OUT
4 GND
GND
MCP1415R MCP1416R
NC ₁
GND ₂
IN 3
5 ^VDD
V_DD
4 OUT
OUT
 2010 Microchip Technology Inc.
DS22092D-page 1