|
MCP103T-195I Datasheet, PDF (1/28 Pages) Microchip Technology – Micropower Voltage Supervisors | |||
|
MCP102/103/121/131
Micropower Voltage Supervisors
Features
Package Types
⢠Ultra low supply current: 1.75 µA
(steady-state max.)
⢠Precision monitoring options of:
- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38V and
4.63V
⢠Resets microcontroller in a power-loss event
⢠RST pin (Active-low):
- MCP121: Active-low, open-drain
- MCP131: Active-low, open-drain with internal
pull-up resistor
- MCP102 and MCP103: Active-low, push-pull
⢠Reset Delay Timer (120 ms delay, typ.)
⢠Available in SOT23-3, TO-92 and SC-70
packages
⢠Temperature Range:
- Extended: -40°C to +125°C
(except MCP1XX-195)
- Industrial: -40°C to +85°C (MCP1XX-195 only)
⢠Pb-free devices
Applications
⢠Critical Microcontroller and Microprocessor
Power-monitoring Applications
⢠Computers
⢠Intelligent Instruments
⢠Portable Battery-powered Equipment
General Description
The MCP102/103/121/131 are voltage supervisor
devices designed to keep a microcontroller in reset
until the system voltage has reached and stabilized at
the proper level for reliable system operation. Table 1
shows the available features for these devices.
TABLE 1: DEVICE FEATURES
SOT23-3/SC-70
TO-92
RST 1
VDD 2
3 VSS
RST
VDD VSS
SOT23-3/SC-70
VSS 1
3 VDD
RST 2
Block Diagram
VDD
Comparator
+
Reset
â
Delay
Circuit
Output
Driver
R (1)
RST
Band Gap
Reference
VSS Note 1: MCP131 Only
Device
Output
Reset Package Pinout
Type Pull-up Resistor Delay (typ) (Pin # 1, 2, 3)
Comment
MCP102 Push-pull No
MCP103 Push-pull No
MCP121 Open-drain External
MCP131 Open-drain Internal (~95 kï)
MCP111 Open-drain External
120 ms
120 ms
120 ms
120 ms
No
MCP112 Push-Pull No
No
RST, VDD, VSS
VSS, RST, VDD
RST, VDD, VSS
RST, VDD, VSS
VOUT, VSS, VDD
VOUT, VSS, VDD
See MCP111/112 Data Sheet
(DS21889)
See MCP111/112 Data Sheet
(DS21889)
ï£ 2004-2013 Microchip Technology Inc.
DS21906C-page 1
|
▷ |