EMC1182 Datasheet, PDF (1/48 Pages) SMSC Corporation – Dual Channel 1C Temperature Sensor with Beta Compensation and 1.8V SMBus Communications

EMC1182
Dual Channel 1°C Temperature Sensor with Beta
Compensation and 1.8V SMBus Communications
PRODUCT FEATURES
General Description
The EMC1182 is a high accuracy, low cost, 1.8V System
Management Bus (SMBus) compatible temperature sensor.
Advanced features such as Resistance Error Correction (REC),
Beta Compensation (to support CPU diodes requiring the
BJT/transistor model including 65nm and lower geometry
processors) and automatic diode type detection combine to
provide a robust solution for complex environmental monitoring
applications. The ability to communicate at 1.8V SMBus levels
provides compatible I/O for the advanced processors found in
today’s tablet and smartphone applications.
The EMC1182 monitors two temperature channels (one
external and one internal), providing ±1°C accuracy for both
external and internal diode temperatures.
REC automatically eliminates the temperature error caused by
series resistance allowing greater flexibility in routing thermal
diodes. Frequency hopping* and analog filters ensure remote
diode traces can be as far as eight (8) inches without degrading
the signal. Beta Compensation eliminates temperature errors
caused by low, variable beta transistors common in today's fine
geometry processors. The automatic beta detection feature
monitors the external diode/transistor and determines the
optimum sensor settings for accurate temperature
measurements regardless of processor technology. This frees
the user from providing unique sensor configurations for each
temperature monitoring application. These advanced features
plus ±1°C measurement accuracy provide a low-cost, highly
flexible and accurate solution for critical temperature monitoring
applications.
Datasheet
Applications
 Notebook Computers
 Desktop Computers
 Industrial
 Embedded applications
Features
 Support for diodes requiring the BJT/transistor model
— Supports 65nm and lower geometry CPU thermal
diodes
 Pin and register compatible with EMC1412
 Automatically determines external diode type and
optimal settings
 Resistance Error Correction
 Frequency hops the remote sample frequency to reject
DC converter and other coherent noise sources*
 Consecutive Alert queue to further reduce false Alerts
 Up to 1 External Temperature Monitor
— 25°C typ, ±1°C max accuracy (20°C < T_DIODE < 110°C)
— 0.125°C resolution
— Supports up to 2.2nF diode filter capacitor
 Internal Temperature Monitor
— ±1°C accuracy
— 0.125°C resolution
 3.3V Supply Voltage
 1.8V SMBus operation
 Programmable temperature limits for ALERT/THERM2
(85°C default high limit and 0°C default low limit) and
THERM (85°C default)
 Available in small 8-pin 2mm x 3mm TDFN RoHS
compliant package
 Available in small 8-pin 3mm x 3mm DFN RoHS
compliant package
EMC1182
Switching
Current
DP
Analog
D1
Mux
N1
ΔΣADC
ALERT / THERM2
THERM / ADDR
Internal
Temp Diode
Interupt Masking
SMBus Address Decode
VDD
External
Temperature
Register(s)
Internal
Temperature
Register
GND
Status Registers
Conversion Rate Register
Low Limit Registers
High Limit Registers
THERM Limit Register
THERM Hysteresis
Register
Configuration Register
CPU / GPU
SMCLK
SMDATA
Thermal
Junction
VDD = 3.3V
1.8V 1.8V – 3.3V
VDD
DP
DN
EMC1182
SMCLK
SMDATA
ALERT / THERM2
Host
SMBus
Interface
GND
THERM / ADDR
Power Control
* Technology covered under the US patent 7,193,543.
SMSC EMC1182
DATASHEET
Revision 1.0 (07-11-13)