DM163007 Datasheet, PDF (1/2 Pages) Microchip Technology – PICDEM™ CAN-LIN 1, 2 and 3 Demonstration Boards

PICDEM^™ CAN-LIN 1, 2 and 3 Demonstration Boards
Summary
Microchip offers three similar PICDEM CAN-LIN demonstration
boards to support different PIC®microcontroller devices. All
demonstrate the main features of the devices, especially those
features of the integrated CAN module. In addition to the CAN
network, the board also employs a LIN sub-network using
Microchip's PIC16C43X and PIC18F1320 device families.
Each PICDEM CAN-LIN demonstration board includes both
firmware and PC software for simulating a CAN network.
The firmware comes pre-programmed on the sample device. The
PC software and documentation are furnished on a CD ROM.
Features
PICDEM CAN-LIN 1 supports:
• 68-pin PLCC PIC18C658 and 84-pin PLCC PIC18C858
devices
• 20-pin PDIP PIC16C432 with integrated LIN Bus
transceiver
PICDEM CAN-LIN 2 supports:
• 28-pin SDIP PIC18F258 and PIC18F2680/2682/2685
devices
• 40-pin PDIP PIC18F458 and PIC18F4680/4682/4685
devices
• 20-pin PDIP PIC16C432 with integrated LIN Bus
transceiver
PICDEM CAN-LIN 3 supports:
• 64-pin TQFP PIC18F6680 and 80-pin TQFP PIC18F8680
devices
• 20-pin SSOP PIC18F1320 and MCP201 LIN Bus
transceiver
The kits all share the following common features:
• On-board digital and analog +5V regulator for direct
input from 12V AC/DC wall adapter
• Two on-board CAN nodes and optional external CAN bus
connectors
• On-board LIN Bus master and slave node
• Optional external LIN Bus connector
• DB-9 RS-232 interface to IBM compatible PC
• Two optional In-Circuit Serial Programming™ (ICSP™)
MPLAB®ICD 2 connectors
• Optional header for LCD panel
• CAN Bus monitoring software for PC
• Devices preprogrammed with CAN Bus monitor firmware
• Generous prototyping area
Package Contents
• PICDEM CAN-LIN PCB
• Serial cable
• Sample programs, application notes and user's guide
(on CD)
Host System Requirements
• PC-compatible system with an Intel Pentium®class or
higher processor, or equivalent
• A minimum of 16 MB RAM
• A minimum of 40 MB available hard drive space
• CD ROM drive
• Microsoft Windows®98, Windows NT®4.0, Windows
2000 or Windows XP
Microchip Technology Incorporated