|
BM63 Datasheet, PDF (1/56 Pages) Microchip Technology – Bluetooth® 4.2 Stereo Audio Module | |||
|
BM63
Bluetooth® 4.2 Stereo Audio Module
Features
⢠Qualified for Bluetooth v4.2 specifications
⢠Supports HFP 1.6, HSP 1.2, A2DP 1.3, SPP 1.2,
AVRCP 1.6
⢠Supports Bluetooth 4.2 dual-mode (BR/EDR/BLE)
specifications (FW dependent)
⢠Stand-alone module with on-board PCB antenna
and Bluetooth stack
⢠Supports high resolution up to 24-bit, 96 kHz
audio data format
⢠Supports to connect two hosts with HFP/A2DP
profiles simultaneously
⢠Supports to connect one host with SPP/BTLE
⢠Transparent UART mode for seamless serial data
over UART interface
⢠Easy to configure with Windows® GUI or directly
by external MCU
⢠Supports firmware field upgrade
⢠Supports one microphone
⢠Castellated surface mount pads for easy and reli-
able host PCB mounting
⢠RoHS compliant
⢠Ideal for portable battery operated devices
⢠Internal battery regulator circuitry
DSP Audio Processing
⢠Supports 64 kbps A-Law, ï-Law PCM format/
Continuous Variable Slope Delta (CVSD) Modula-
tion for SCO channel operation
⢠Supports 8/16 kHz noise suppression
⢠Supports 8/16 kHz echo cancellation
⢠Supports Modified Sub-Band Coding (MSBC)
decoder for wide band speech
⢠Built-in High Definition Clean Audio (HCA) algo-
rithms for both narrow band and wide band
speech processing
⢠Packet loss concealment (PLC)
⢠Built-in audio effect algorithms to enhance audio
streaming
⢠Supports Serial Copy Management System
(SCMS-T) content protection
FIGURE 1:
BM63 MODULE
Audio Codec
⢠SBC and optional AAC decoding
⢠20-bit DAC with 98 dB SNR
⢠16-bit ADC with 92 dB SNR
⢠Up to 24-bit, 96 kHz, I2S digital audio
Peripherals
⢠Built-in lithium-ion and lithium-polymer battery
charger (up to 350 mA)
⢠Integrated 1.8V and 3V configurable switching
regulator and low-dropout (LDO)
⢠Built-in ADC for battery voltage sense
⢠An AUX-In port for external audio input
⢠Three LED drivers
⢠Multiple I/O pins for control and status
ï£ 2016 Microchip Technology Inc.
Advance Information
DS60001431A-Page 1
|
▷ |