AR1000_16 Datasheet, PDF (1/61 Pages) Microchip Technology – AR1000 Series Resistive Touch Screen Controller

AR1000 SERIES RESISTIVE TOUCH
SCREEN CONTROLLER
AR1000 Series Resistive Touch Screen Controller
Special Features
• RoHS Compliant
• Power-Saving Sleep mode
• Industrial Temperature Range
• Built-in Drift Compensation Algorithm
• 128 Bytes of User EEPROM
Power Requirements
• Operating Voltage: 2.5-5.0V ±5%
• Standby Current:
- 5V: 85 µA, typical; 125 µA (maximum)
- 2.5V: 40 µA, typical; 60 µA (maximum)
• Operating “No touch” Current:
- 3.0 mA (typical)
• Operating “Touch” Current:
- 17 mA, typical, with a touch sensor having
200 layers
- Actual current is dependent on the touch
sensor used
• AR1011/AR1021 Brown-Out Detection (BOR) set
to 2.2V
Touch Modes
• Off, Stream, Down, Up and more.
Touch Sensor Support
• 4-Wire, 5-Wire and 8-Wire Analog Resistive
• Lead-to-Lead Resistance: 50-2,000typical)
• Layer-to-Layer Capacitance: 0-0.5 µF
• Touch Sensor Time Constant: 500 µs (maximum)
Touch Resolution
• 10-bit Resolution (maximum)
Touch Coordinate Report Rate
• 140 Reports Per Second (typical) with a Touch
Sensor of 0.02 µF with 200 Layers
• Actual Report Rate is dependent on the Touch
Sensor used
Communications
• SPI, Slave mode, p/n AR1021
• I²C, Slave mode, p/n, AR1021
• UART, 9600 Baud Rate, p/n AR1011
 2009-2016 Microchip Technology Inc.
DS40001393C-page 1