AC162051 Datasheet, PDF (1/4 Pages) Microchip Technology – MPLAB® ICD HEADER

12
MPLAB^® ICD HEADER (AC162051)
Information Sheet
Introduction
The MPLAB^® ICD Header (Part Number AC162051) provides a means of
connecting the MPLAB ICD 2 Module to a target board that does not
incorporate a 6-wire modular connection into its design. The board is
designed for 40-pin devices supported by MPLAB ICD 2. Please see the
README.ID2 in the MPLAB IDE software for specific details on devices
supported.
The MPLAB ICD 2 Module connects to the MPLAB ICD Header via a 9-inch
modular cable. For in-circuit debugging, insert a 40-pin PICmicro^® into the
MPLAB ICD Header, then insert the header board into a 28-pin or 40-pin DIP
socket on the target application. The 28-pin connector on the underside
allows debugging of a 28-pin device using a 40-pin device as the master (U2).
Pin connections translate a 40-pin device to the 28-pin device.
MPLAB ICD 2 Module
Power in
MPLAB ICD Header
U2
Target Socket
Target Application
Figure 1: MPLAB ICD 2 Module Connection with Header
 2002 Microchip Technology Inc.
DS51291A-page 1