ML78L00-FBL1 Datasheet, PDF (1/5 Pages) Micro Electronics – 3-TERMINAL POSITIVE VOLTAGE REGULATOR

ML78L00-FBL1*
SERIES
3-TERMINAL POSITIVE
VOLTAGE REGULATOR
The ML78L00-FBL1* series of 3-Terminal Positive Voltage Regulators. These regulators employ internal current-limiting
and thermal-shutdown, making them essentially indestructible. If adequate heat sinking is provided, they can deliver up to
100mA output current. They are intended as fixed voltage regulators in a wide range of applications including local or on-
card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they
can be used with power pass elements to make high-current voltage regulators. The ML78L00-FBL1 series used as a zener
diode/resistor combination replacement, offers an effective output impedance improvement of typically two orders of
magnitude, along with lower quiescent current and lower noise.
* FBL1 menas lead free compoent.
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
MAXIMUM RATINGS
(ML78L05A to ML78L10A) 30
Input Voltage
V_IN (ML78L12A to ML78L18A) 35
(ML78L24A)
40
Output Current
Io
100
Power Dissipation
P_D
Operating Temperature Range Topr
500
-40 to +85
Storage Temperature Range
Tstg
-40 to +150
(Ta=25℃)
UNIT
V
mA
mW
℃
℃
■ Package Outline
TO-92
1. OUT
2. GND
3. IN
1
2
3
ELECTRICAL CHARACTERISTICS
(Tj=25℃,C_IN=0.33μF,Co=0.1μF)
Measurement is to be conducted is pulse testing.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN. TYP. MAX. UNIT
ML78L05A
Output Voltage
Line Regulation 1
Line Regulation 2
Load Regulation 1
Load Regulation 2
Quiescent Current
Average Temperature
Cofficient of Output Voltage
Ripple Rejection
Output Noise Voltage
ML78L06A
Vo
V_IN=10V
ΔVo Vin 1 ^VIN^{=7V to 20V}
ΔVo Vin 2 ^VIN^{=8V to 20V}
ΔVo Io 1 ^VIN^=10V
ΔVo Io 2 ^VIN^=10V
IQ
V_IN=10V
ΔVo / ΔT ^VIN^=10V
RR
VNO
8V<V_IN<18V
V_IN=10V
Io=40mA
Io=40mA
Io=40mA
Io=1 to 40mA
Io=1 to 100mA
Io=0mA
Io=1mA
Io=40mA
ein=1Vp-p f=120Hz
BW=10Hz to 100KHz
Io=40mA
4.75 5.0 5.25 V
-
- 150 mV
-
- 100 mV
-
-
30 mV
-
-
60 mV
-
3.8 6
mA
-
0.4
- mV/℃
41 49
-
dB
-
42
-
μV
Output Voltage
Line Regulation 1
Line Regulation 2
Load Regulation 1
Load Regulation 2
Quiescent Current
Average Temperature
Cofficient of Output Voltage
Ripple Rejection
Output Noise Voltage
Vo
V_IN=11V
ΔVo Vin 1 ^VIN^{=8V to 20V}
ΔVo Vin 2 ^VIN^{=9V to 20V}
ΔVo Io 1 ^VIN^=11V
ΔVo Io 2 ^VIN^=11V
IQ
V_IN=11V
ΔVo / ΔT ^VIN^=11V
RR
VNO
9V<V_IN<19V
V_IN=11V
Io=40mA
Io=40mA
Io=40mA
Io=1 to 40mA
Io=1 to 100mA
Io=0mA
Io=1mA
Io=40mA
ein=1Vp-p f=120Hz
BW=10Hz to 100KHz
Io=40mA
5.7 6.0 6.3
V
-
- 175 mV
-
- 125 mV
-
-
40 mV
-
-
80 mV
-
3.9 6
mA
-
0.5
- mV/℃
40 48
-
dB
-
46
-
μV
Jun-05
Sheet 1 of 5