KSZ8862MQL Datasheet, PDF (80/125 Pages) Micrel Semiconductor – 2-Port Ethernet Switch with Non-PCI Interface and Fiber Support

Micrel, Inc.
KSZ8862-16/32MQL
Bank 44 Digital Testing Status Register (0x00): DTSR
This register contains the user defined register for the switch function.
Bit
Default R/W Description
15-3
0x0000 RO Reserved
2-0
0x0
RO Reserved
Bank 44 Analog Testing Status Register (0x02): ATSR
This register contains the user defined register for the switch function.
Bit
Default R/W Description
15-8
0x00
RO Reserved
7-0
0x00
RO Reserved
Bank 44 Digital Testing Control Register (0x04): DTCR
This register contains the user defined register for the switch function.
Bit
Default R/W Description
15-8
0x00
RO
Reserved
7-0
0x3F
RW Reserved
Bank 44 Analog Testing Control Register 0 (0x06): ATCR0
This register contains the user defined register for the switch function.
Bit
Default R/W Description
15-8
7-6
0x00
0x00
5-0
0x00
RO Reserved
RW LED Driver Current Set
00 = 60 mA
01 = 80 mA
10 = 97 mA
11 = 40 mA
RW Reserved
Bank 44 Analog Testing Control Register 1 (0x08): ATCR1
This register contains the user defined register for the switch function.
Bit
Default R/W Description
15-0
0x0000 RW Reserved
Bank 44 Analog Testing Control Register 2 (0x0A): ATCR2
This register contains the user defined register for the switch function.
Bit
Default R/W Description
15-0
0x0000 RW Reserved
Bank 45 PHY 1 MII-Register Basic Control Register (0x00): P1MBCR
This register contains Media Independent Interface (MII) register for switch port 1 as defined in the IEEE 802.3
specification.
Bit
Default
R/W Description
Bit is same as:
15
0
RO Soft reset
Not supported.
14
0
RW Far-End Loopback
1 = perform loopback as follows:
Bank 49 0x02 bit 8
August 2010
80
M9999-081310-3.1