PL565-68 Datasheet, PDF (8/12 Pages) Micrel Semiconductor – Analog Frequency Multiplier

(Preliminary) Analog Frequency Multiplier
PL565-68 VCXO
ELECTRICAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
PARAMETERS
SYMBOL
MIN.
MAX.
UNITS
Supply Voltage
V_DD
4.6
V
Input Voltage, DC
V_I
GND-0.5
V_DD+0.5
V
Output Voltage, DC
V_O
GND-0.5
V_DD+0.5
V
Storage Temperature
T_S
-65
150
C
Ambient Operating Temperature, Industrial
T_{A_ I}
-40
+85
C
Ambient Operating Temperature, Commercial
T _{A_ C}
0
+70
C
Junction Temperature
T_J
125
C
Lead Temperature (soldering, 10s)
260
C
Input Static Discharge Voltage Protection (HBM)
2
kV
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the
device and affect product reliability. These conditions represent a stress rating only, and functional operations of the dev ice at these or any other
conditions above the operational limits noted in this specification is not implied .
VOLTAGE CONTROL SPECIFICATION
PARAMETERS
SYMBOL
CONDITIONS
MIN.
TYP. MAX. UNITS
VCXO Stabilization Time
VCXO Tuning Range*
CLK Output Pullability*
Linearity
T_VCXOSTB
From power valid
XTAL C₀ /C₁ <300
VCON= 1.65V,  1.65V
XTAL C₀ /C₁ <300
200
100
120
5
10
ms
ppm
ppm
10
%
VCON Input Impedance
10
MΩ
VCON Modulation BW
0V < VCON < 3.3V, -3dB
40
kHz
* Note: The VCXO Tuning Range and Pullability can be controlled with the value for inductor L1X. See Tuning Assistant documen t for a
guide to chose the L1X value based upon crystal frequency and motional parameters.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax [phone] • www.micrel.com Rev 12/08/11 Page 8