PL560-08_12 Datasheet, PDF (8/12 Pages) Micrel Semiconductor – Analog Frequency Multiplier

(Preliminary) Analog Frequency Multiplier
PL560/565-08 VCXO Family
ELECTRICAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
PARAMETERS
SYMBOL
MIN.
MAX.
UNITS
Supply Voltage
V_DD
4.6
V
Input Voltage, DC
V_I
GND-0.5
V_DD+0.5
V
Output Voltage, DC
V_O
GND-0.5
V_DD+0.5
V
Storage Temperature
T_S
-65
150
C
Ambient Operating Temperature, Industrial
T_{A_ I}
-40
+85
C
Ambient Operating Temperature, Commercial
T _{A_ C}
0
+70
C
Junction Temperature
T_J
125
C
Lead Temperature (soldering, 10s)
260
C
Input Static Discharge Voltage Protection (HBM)
2
kV
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permane nt damage to the
device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other
conditions above the operational limits noted in this specification is not implied .
VOLTAGE CONTROL SPECIFICATION
PARAMETERS
SYMBOL
CONDITIONS
MIN.
TYP. MAX. UNITS
VCXO Stabilization Time
VCXO Tuning Range*
CLK Output Pullability*
Linearity
T_VCXOSTB
From power valid
XTAL C₀ /C₁ <300
VCON= 1.65V,  1.65V
XTAL C₀ /C₁ <300
200
100
120
5
10
ms
ppm
ppm
10
%
VCON Input Impedance
130
kΩ
VCON Modulation BW
0V < VCON < 3.3V, -3dB
40
kHz
* Note: The VCXO Tuning Range and Pullability can be controlled with the value for inductor L1X. See Tuning Assistant documen t for a
guide to chose the L1X value based upon crystal frequency and motional parameters.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax [phone] • www.micrel.com Rev 6/22/11 Page 8