PL904XXX Datasheet, PDF (5/15 Pages) Micrel Semiconductor – a small form-factor, high performance, programmable device

Micrel, Inc.
PL904xxx
Absolute Maximum Ratings⁽³⁾
Supply Voltage (V_DD, V_DDI, V_DDA, V_DDOA/B)....................+4.6V
Input Voltage (V_IN) ................................ −0.5V to V_DD + 0.5V
Lead Temperature (soldering, 20s)............................ 260°C
Case Temperature ..................................................... 115°C
Storage Temperature (Ts).........................–65°C to +150°C
Operating Ratings⁽⁴⁾
Supply Voltage
(V_DD, V_DDA, V_DDOA/B, V_DDI)....................... +2.375V to +3.465V
Ambient Temperature (T_A) .......................... –40°C to +85°C
Junction Thermal Resistance⁽⁵⁾
(θ_JA), Still-Air ...................................................... 34°C/W
DC Electrical Characteristics⁽⁶⁾
V_DD, V_DDA, V_DDOA/B, V_DDI = 2.375V ~ 3.465V; T_A = –40°C to +85°C.
Symbol Parameter
Condition
VDD
VDDA
VDDOA/B
VDDI
Power supply voltage
Power supply voltage
2 × LVPECL, 156.25MHz
Outputs open
IDD
Total supply current, VDD + VDDO
2 × HCSL (PCIe), 100MHz
Outputs terminated with 50Ω to VSS
2 × LVCMOS, 125MHz
Outputs open
Min.
Typ. Max. Units
2.375
3.465
V
3.135
3.465
V
220
mA
230
mA
210
mA
REFIN DC Electrical Characteristics⁽⁶⁾
V_DDI = 3.135V ~ 3.465V; T_A = –40°C to +85°C.
Symbol Parameter
Condition
Min.
Typ. Max. Units
VCMR
Input common mode voltage
0.3
VDDI –
0.3
V
VSWING
Input voltage swing
Peak to peak. Each side of the differential
input.
0.2
VDDI
VPP
Notes:
3. Exceeding the absolute maximum ratings may damage the device.
4. The device is not guaranteed to function outside its operating ratings.
5. Package thermal resistance assumes the exposed pad is soldered (or equivalent) to the device’s most negative potential on the PCB.
6. The circuit is designed to meet the AC and DC specifications shown in the Electrical Characteristics tables after thermal equilibrium has been
established.
September 11, 2015
5
Revision 1.0
[e-mail] or [phone]