MIC59P60_15 Datasheet, PDF (5/15 Pages) Micrel Semiconductor – 8-Bit Serial-Input Protected Latched Driver

Micrel, Inc.
MIC59P60
Absolute Maximum Ratings⁽¹⁾
Output Voltage (V_CE) ....................................................+80V
Output Voltage (V_CE(SUS))⁽³⁾ ...........................................+50V
Supply Voltage (V_DD) with reference to V_SS .................+15V
Supply Voltage (V_DD) with reference to V_EE .................+25V
Emitter Supply Voltage (V_EE)........................................–20V
Input Voltage Range (V_IN) ..................... –0.3V to V_DD +0.3V
Protective Current⁽⁴⁾ ...................................................... 1.5A
Storage Temperature Range (T_S) ............. –65°C to +150°C
ESD Rating⁽⁵⁾⁽⁶⁾ .............................................. ESD Sensitive
Operating Ratings⁽²⁾
Package Power Dissipation, P_D
Plastic DIP (N) ............................................................. 2.0W
Derate above T_A = +25°C ..................................... 20mW/°C
PLCC (V) ..................................................................... 1.4W
Derate above T_A = +25°C ..................................... 16mW/°C
Wide SOIC (WM) ........................................................ 1.2W
Derate above TA = +25°C.....................................12mW/°C
Operating Temperature Range (T_A) ............ –40°C to +85°C
Electrical Characteristics⁽⁷⁾
V_DD = 5V, V_SS = V_EE = 0V; T_A = +25°C, unless noted.
Symbol Parameter
Condition
Min. Typ. Max.
I_CEX
Output Leakage Current
V_OUT = 80V
V_OUT = 80V, T_A = 70°C
50
100
I_OUT = 100mA
0.9
1.1
V_CE(SAT) Collector-Emitter Saturation Voltage I_OUT = 200mA
1.1
1.3
I_OUT = 350mA
1.3
1.6
V_CE(SUS) Collector-Emitter Sustaining Voltage I_OUT = 350mA, L = 2mH
50
V_IN(0)
1.0
V_IN(1)
Input Voltage
V_DD = 12V
V_DD = 10V
V_DD = 5V⁽⁸⁾
10.5
8.5
3.5
V_DD = 12V
50
200
R_IN
Input Resistance
V_DD = 10V
50
300
V_DD = 5V
50
600
I_OL
Flag Output Current
V_OL = 0.4V
15
I_OH
Flag Output Leakage
50
Notes:
1. Exceeding the absolute maximum ratings may damage the device.
2. The device is not guaranteed to function outside its operating ratings.
3. For inductive load applications.
4. Each channel. VEE connection must be designed to minimize inductance and resistance.
5. Devices are input-static protected but can be damaged by extremely high static charges.
6. Devices are ESD sensitive. Handling precautions are recommended. Human body model, 1.5kΩ in series with 100pF.
7. Specification for packaged product only
8. Operation of these devices with standard TTL or DTL may require the use of appropriate pull-up resistors to insure a minimum logic "1".
Units
µA
V
V
V
V
kΩ
mA
nA
August 4, 2015
5
Revision 2.0