MIC5380 Datasheet, PDF (5/12 Pages) Micrel Semiconductor – High Performance Dual 150mA LDO 1mm x 1mm Thin MLF

Micrel, Inc.
MIC5380/1
Absolute Maximum Ratings⁽¹⁾
Supply Voltage (V_IN) ........................................ –0.3V to +6V
Enable Voltage (V_EN1, V_EN2)............................... –0.3V to V_IN
Power Dissipation (P_D) ........................... Internally Limited⁽³⁾
Lead Temperature (soldering, 10sec.)....................... 260°C
Junction Temperature (T_J) ........................ –40°C to +125°C
Storage Temperature (T_s) ......................... –65°C to +150°C
ESD Rating⁽⁴⁾.................................................................. 2kV
Operating Ratings⁽²⁾
Supply Voltage (V_IN) ....................................... +2.5V to 5.5V
Enable Voltage (V_EN1, V_EN2)............................... –0.3V to V_IN
Junction Temperature (T_J) ........................ –40°C to +125°C
Junction Thermal Resistance
1mm x 1mm Thin MLF-6 (θ_JA) .........................150°C/W
Electrical Characteristics⁽⁵⁾
V_IN = V_EN1 = V_EN2 = V_OUT + 1V; higher of the two regulator outputs; I_OUTLDO1 = I_OUTLDO2 = 100µA; C_OUT1 = C_OUT2 = 1µF;
T_J = 25°C, bold values indicate –40°C to +125°C, unless noted.
Parameter
Condition
Min Typ Max Units
Output Voltage Accuracy
Line Regulation
Variation from nominal VOUT
Variation from nominal VOUT; –40°C to +85°C
VIN = VOUT +1V to 5.5V, IOUT = 100µA
±1
%
–3.0
+3.0
%
0.02
0.3
%/V
Load Regulation
Dropout Voltage
Ground Pin Current
Ground Pin Current in
Shutdown
IOUT = 100µA to 150mA
IOUT = 50mA
IOUT = 150mA
VEN1 = High; VEN2 = Low; IOUT = 0mA
VEN1 = Low; VEN2 = High; IOUT = 0mA
VEN1 = VEN2 = High; IOUT1 = IOUT2 = 0mA
VEN1 = VEN2 = 0V
0.3
1
%
55
110
mV
155
310
mV
32
45
µA
32
45
µA
59
85
µA
0.05
1
µA
Ripple Rejection
f = 1kHz; COUT = 1µF
60
dB
Current Limit
VOUT = 0V
200 325 550
mA
Output Voltage Noise
COUT = 1µF, 10Hz to 100kHz
200
µVRMS
Auto-Discharge NFET
Resistance
MIC5381 Only; VEN1 = VEN2 = 0V; VIN = 3.6V
30
Ω
Enable Inputs (EN1/EN2)
Enable Input Voltage
Logic Low
0.2
V
Logic High
1.2
V
Enable Input Current
Turn-on Time
VIL ≤ 0.2V
VIH ≥ 1.2V
COUT = 1µF
0.01
1
µA
0.01
1
µA
50
125
µs
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. The maximum allowable power dissipation of any TA (ambient temperature) is PD(max) = (TJ(max) – TA) / θJA. Exceeding the maximum allowable power
dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.
4. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5kΩ in series with 100pF.
5. Specification for packaged product only.
November 2008
5
M9999-110608-A