MIC44F18_11 Datasheet, PDF (5/17 Pages) Micrel Semiconductor – 6A, 13V High Speed MOSFET Drivers with Enable Input

Micrel, Inc.
MIC44F18/19/20
Electrical Characteristics (Continued)
4.5V< V_dd< 13.2V; C_L =1000pf; T_A = 25°C, bold values indicate –40°C< T_j < +125°C, unless noted.
Symbol Parameter
Condition
Min. Typ. Max. Units
Output
V_OH
High Output Voltage
See Figure 1
V_S-
0.025
V
V_OL
R_O
I_PEAK
I_R
Low Output Voltage
Output Resistance, Output High
Output Resistance, Output Low
Peak Output Sink Current
Peak Output Source Current
Latch-Up Protection Withstand
Reverse Current
See Figure 1
I_OUT = 100mA, V_dd = 12V
I_OUT = 100mA, V_dd = 5V
I_OUT = 100mA, V_dd = 12V
I_OUT = 100mA, V_dd = 5V
V_dd = 12V
V_S = 12V
6
6
>500
0.025
V
2
Ω
3
2
Ω
3
A
A
mA
Switching Time
t_R
Rise Time
V_S = 12V, C_L=1000pF
See Timing Diagram
10
20
ns
t_F
Fall Time
V_S = 12V, C_L=1000pF
See Timing Diagram
10
20
ns
t_D1
Delay Time
V_S = 12V, C_L=1000pF
See Timing Diagram
15
35
ns
t_D2
Delay Time
V_S = 12V, C_L=1000pF
See Timing Diagram
13
35
ns
t_PW
Pulse Width
V_S = 12V
See Timing Diagram
50
ns
f_MAX
Maximum Input Frequency
V_S = 12V
See Timing Diagram 2
Note 6
MHz
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5k in series with 100pF.
4. Specification for packaged product only.
5. The device is protected from damage when -5V< Vin< 0V. However, 0V is the recommended minimum continuous V_IL voltage.
See the applications section for additional information.
6. See applications section for information on the maximum operating frequency.
February 2011
5
M9999-020111