MIC37300_09 Datasheet, PDF (5/13 Pages) Micrel Semiconductor – 3.0A, Low-Voltage μCap LDO Regulator

Micrel, Inc.
MIC37300/01/02/03
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. P_D(max) = (T_J(max) – T_A) / θ_JA, where θ_JA, depends upon the printed circuit layout. See “Applicatins Information.”
4. Devices are ESD sensitive. Handling precautions recommended.
5. Specification for packaged product only.
6. V_DO = V_IN – V_OUT when V_OUT decreases to 98% of its nominal output voltage with V_IN = V_OUT + 1V. For output voltages below 1.75, dropout voltage
specification does not apply due to a minimum input operating voltage of 2.25V.
7. I_GND is the quiescent current. I_IN = I_GND + I_OUT.
8. For a 2.5V device, V_IN = 2.250V (device is in dropout).
October 2009
5
M9999-102909