MIC2560_06 Datasheet, PDF (5/8 Pages) Micrel Semiconductor – PCMCIA Card Socket VCC and VPP Switching Matrix

Micrel, Inc.
MIC2560
Symbol Parameter
Power Supply
I_CC5
V_{CC5 IN} Supply Current
I_CC3
V_{CC3 IN} Supply Current
I_{PP IN}
V_{PP IN} Supply Current
(I_{PP OUT} = 0)
V_{CC5 IN}
Operating Input Voltage
V_{CC3 IN}
Operating Input Voltage
V_{PP IN}
Operating Input Voltage
Suspend Mode (Note 4)
I_CC3
Active Mode Current
R_ON V_CC
V_{CC OUT} R_ON
Condition
I_{CC OUT} = 0
V_{CC OUT} = 5V or 3.3V, I_{CC OUT} = 0
V_{CC OUT} = hi-Z (Sleep mode)
V_CC active, V_{PP OUT} = 5V or 3.3V
V_{PP OUT} = hi-Z, 0 or V_PP
V_CC5 IN ≥ V_CC3 IN
V_{CC3 IN} ≤ V_{CC5 IN}
V_{PP IN} = 0V, V_CC3 = V_CC3 = 3.3V
V_CC3 = enabled
V_PP = disabled (hi-Z or 0V)
V_{PP IN} = 0V, V_CC5 = V_CC3 = 3.3V
V_CC3 = enabled
V_PP = disabled (hi-Z or 0V)
Min Typ Max Units
0.01
10
µA
30
50
µA
0.01
10
µA
15
50
µA
0.01
10
µA
V_{CC3 IN}
5.0
6
V
2.8
3.3
V_{CC3 IN}
V
8.0
12.0 14.5
V
30
µA
4.5
Ω
Notes:
1. Functional operation above the absolute maximum stress ratings is not implied.
2. Static-sensitive device. Store only in conductive containers. Handling personnel and equipment should be grounded to prevent damage from static
discharge.
3. Leakage current after 1,000 hours at 125°C may increase up to five times the initial limit.
4. Suspend mode is a pseudo-power-down mode the MIC2560 automatically allows when V_{PP IN} = 0V, V_{PP OUT} is deselected, and V_{CC OUT} =3.3V is
selected. Under these conditions, the MIC2560 functions in a reduced capacity mode where V_CC output of 3.3V is allowed, but at lower current levels
(higher switch on-resistance).
September 2006
5
M9999-092106