MIC5307_07 Datasheet, PDF (4/9 Pages) Micrel Semiconductor – 300mA Micropower μCap Baseband LDO

Micrel, Inc.
Absolute Maximum Ratings⁽¹⁾
Supply Voltage (V_IN) ............................................... 0V to 6V
Enable Input Voltage (V_EN)..................................... 0V to 6V
Power Dissipation (P_D)⁽³⁾ ...........................Internally Limited
Junction Temperature (T_J) ........................–40°C to +125°C
Lead Temperature (soldering, 5sec.)......................... 260°C
Storage Temperature (T_s) .........................–65°C to +150°C
ESD Rating⁽⁴⁾.................................................................. 2kV
MIC5307
Operating Ratings⁽²⁾
Supply voltage (V_IN) ....................................... 2.4V to +5.5V
Enable Input Voltage.............................................. 0V to V_IN
Junction Temperature (T_J) ........................ –40°C to +125°C
Thermal Resistance
TSOT23-5 (θ_JA)................................................235°C/W
2x2 Thin MLF-6 (θ_JA) .........................................93°C/W
Electrical Characteristics⁽⁵⁾
V_IN = V_OUT + 1.0V; C_OUT = 2.2µF; I_OUT = 100µA; T_J = 25°C, bold values indicate –40°C to +125°C, unless noted.
Parameter
Condition
Min
Typ
Max Units
Output Voltage Accuracy
Line Regulation
Variation from nominal V_OUT
Variation from nominal V_OUT; –40°C to +125°C
V_IN = V_OUT +1V to 5.5V
Load Regulation
Dropout Voltage⁽⁴⁾
Ground Pin Current
Ground Pin Current in Shutdown
Ripple Rejection
Current Limit
Thermal Shutdown
Thermal Shutdown Hysteresis
Output Voltage Noise
Enable Input
Enable Input Voltage
Enable Input Current
Turn-on Time⁽⁶⁾
I_OUT = 100µA to 300mA
I_OUT = 50mA
I_OUT = 100mA
I_OUT = 150mA
I_OUT = 300mA
I_OUT = 0mA to 150mA; V_IN = 5.5V
I_OUT = 0mA to 300mA; V_IN = 5.5V
V_EN < 0.2V; V_IN = 5.5V
f = 10Hz to 1kHz; C_OUT = 2.2µF; I_OUT = 300mA
f = 20kHz; C_OUT = 2.2µF; I_OUT = 300mA
V_OUT = 0V
C_OUT = 2.2µF; 10Hz to 100kHz
Logic Low
Logic High
V_IL < 0.2V
V_IH > 1.0V
C_OUT = 2.2µF
–1
+1
%
–2
+2
%
0.01
0.3
%/V
0.5
%/V
0.5
1
%
1.5
%
20
mV
40
mV
60
mV
120
250
mV
18
µA
20
30
µA
0.01
1
µA
62
dB
35
dB
350
500
800
mA
160
°C
20
°C
80
µV_RMS
0.2
V
1.0
V
0.01
1
µA
0.01
1
µA
270
500
µs
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. The maximum allowable power dissipation of any T_A (ambient temperature) is P_D(max) = T_J(max) – T_A / θ_JA. Exceeding the maximum allowable
power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.
4. Devices are ESD sensitive. Handling precautions recommended.
5. Specification for packaged product only.
6. Turn-on time is measured from V_EN = 1V of the positive edge of the enable signal to 90% of the rising edge of the output voltage of the regulator.
August 2007
4
M9999-082407-B