English
Language : 

MIC5283_12 Datasheet, PDF (4/19 Pages) Micrel Semiconductor – 120VIN, 150mA, Ultra-Low IQ, High-PSRR Linear Regulator
Micrel, Inc.
MIC5283
Absolute Maximum Ratings(1)
VIN to GND................................................... –0.3V to +125V
VCPSRR to GND..................................................–0.3 to +14V
VFB, VSNS, VOUT to GND ................................... –0.3V to +6V
Lead Temperature (soldering, 10s).......................... +260°C
Junction Temperature ......................... –40°C  TJ  +125°C
Storage Temperature
ESD Ratings(4)
.........................–65°C

TA

+150°C
HBM ......................................................................... 2kV
MM .........................................................................200V
Electrical Characteristics(5)
Operating Ratings(2)
VIN ................................................................. +6V to +120V
VOUT Adjust Range ..................................... +1.22V to +5.5V
Junction Temperature ......................... –40°C  TJ
Power Dissipation (PD)........................... Internally
 +125°C
Limited(3)
Junction Thermal Resistance (JA)
8-pin ePad SOIC ...............................................41°C/W
3mm x 3mm MLF®-8..........................................60°C/W
VIN = 12V, CIN = 1.0µF, CPSRR = 0.1µF, COUT = 10µF, VOUT = 5.0V or 3.3V, IOUT = 100µA, TA = 25°C, bold values indicate –40°C  TJ 
+125°C, unless noted.
Parameter
Condition
Min. Typ. Max. Units
Power Supply Input
Input Voltage Range
Quiescent Supply Current
Output Voltage
Output Voltage Accuracy
Line Regulation(6)
Feedback Input (Adjustable)
FB Voltage
FB Current
Current Limit
Current Limit
Ripple Rejection
Power Supply Rejection Ratio
IOUT = 0
Variation from nominal VOUT
100µA ≤ IOUT ≤ 150mA
10V ≤ VIN ≤ 120V
100µA ≤ IOUT ≤ 150mA
VFB = 1.22V
VOUT = 0V
IOUT = 50mA
100Hz ≤ f ≤ 1kHz
1kHz < f ≤ 30kHz
30kHz < f ≤ 100kHz
6
120
V
8
14
µA
-3
+3
%
-5
+5
%
-0.5 0.04 +0.5
%/V
1.183 1.220 1.256
V
1.159 1.220 1.281
3.2
nA
180 300
500
mA
70
dB
75
dB
65
dB
Power Dropout Voltage
Dropout Voltage
Thermal Protection
Thermal-Shutdown Temperature
Thermal-Shutdown Hysteresis
IOUT = 150mA
TJ rising
1.8
2.8
V
155
C
15
C
Notes:
1. Exceeding an absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. The maximum allowable power dissipation at any TA (ambient temperature) is PD(max) = (TJ(max) – TA) / θJA. Exceeding the maximum allowable power
dissipation results in excessive die temperature, and causes the regulator to enter thermal shutdown.
4. Devices are ESD sensitive; use proper handling precautions.
5. Specifications are for packaged products only.
6. Line regulation is a percentage of VOUT.
March 2012
4
M9999-030812-A