MIC5254 Datasheet, PDF (4/11 Pages) Micrel Semiconductor – DUAL 150MA UCAP LDO WITH ERROR FLAG OUTPUTS

MIC5254
Micrel
Note 4.
Note 5.
Note 6.
Note 7.
Note 8.
Devices are ESD sensitive. Handling precautions recommended.
Specification for packaged product only.
Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load
range from 0.1mA to 150mA. Changes in output voltage due to heating effects are covered by the thermal regulation specification.
Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V
differential. For outputs below 2.7V, dropout voltage is the input-to-output voltage differential with the minimum input voltage 2.7V. Minimum
input operating voltage is 2.7V.
Ground pin current is the regulator quiescent current. The total current drawn from the supply is the sum of the load current plus the ground
pin current.
MIC5254
4
September 2003