English
Language : 

MIC2981_05 Datasheet, PDF (4/4 Pages) Micrel Semiconductor – High-Voltage High-Current Source Driver Array
MIC2981/2982
Package Information
.250±0.005
(6.350±0.127)
0.060±0.005
(1.524±0.127)
0.130±0.005
(3.302±0.127)
0.020 MIN
(0.508)
0.301 (7.645)
0.297 (7.544)
0.920
(23.370)
MAX
PIN 1
0.030-0.110 RAD
(0.762-2.794)
0.040 TYP
(1.016)
0.020
(0.508)
0.290-0.320
(7.336-8.128)
0°-10°
0.018±0.003
(0.457±0.076)
0.100±0.010
(2.540±0.254)
0.125 MIN
(3.175)
18-Pin Plastic DIP (N)
0.325 +0.025
–0.015
( ) 8.255
+0.635
–0.381
PIN 1
DIMENSIONS:
INCHES (MM)
0.027 (0.686)
0.031 (0.787)
0.094 (2.388)
0.090 (2.286)
0.050 (1.270)
TYP
0.016 (0.046)
TYP
0.103 (2.616)
0.099 (2.515)
7°
TYP
0.015
(0.381)
R
0.459 (11.659)
0.455 (11.557)
0.015
(0.381)
SEATING MIN
PLANE
0.297 (7.544)
0.293 (7.442)
0.022 (0.559)
0.018 (0.457)
5°
0.330 (8.382)
TYP
0.326 (8.280) 10° TYP
0.032 (0.813) TYP
0.408 (10.363)
0.404 (10.262)
18-Pin Wide SOP (WM)
Micrel, Inc.
MICREL INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com
This information furnished by Micrel in this data sheet is believed to be accurate and reliable. However no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 1999 Micrel Incorporated
MIC2981/2982
4
June 2005