MIC2788 Datasheet, PDF (4/17 Pages) Micrel Semiconductor – Push-Button Reset IC

Micrel, Inc.
MIC2788/MIC2789
Absolute Maximum Ratings⁽¹⁾
Supply Voltage (V_IN) ..................................... −0.3V to +6.0V
Reset Input Voltage (/MR0, /MR1). ....... −0.3V to V_IN + 0.3V
Open Drain Reset Output (/RST) ................. −0.3V to +6.0V
Push-Pull Reset Output (RSTP)............ −0.3V to V_IN + 0.3V
Tri-State Programmable Delay (PDY)... −0.3V to V_IN + 0.3V
Lead Temperature (soldering, 10sec.)....................... 260°C
Junction Temperature (T_J) ........................−40°C to +150°C
Storage Temperature (Ts)......................... −55°C to +150°C
ESD Rating (Human Body Model)⁽³⁾ .............................. 2kV
ESD Rating (Machine Model)⁽³⁾....................................300V
Operating Ratings⁽²⁾
Supply Voltage (V_IN)..................................... +1.6V to +5.5V
Reset Input Voltage (/MR0, /MR1)......................... 0V to V_IN
Open Drain Reset Output (/RST)...................... 0V to +5.5V
Push-Pull Reset Output (/RSTP) ........................... 0V to V_IN
Tri-State Programmable Delay (PDY).................... 0V to V_IN
Ambient Temperature (T_A) .......................... –40°C to +85°C
Junction Thermal Resistance
2mm × 2mm Thin MLF^® (θ_JA).............................90°C/W
Electrical Characteristics⁽⁴⁾
V_IN = 3.0V, T_A = 25°C, Bold values indicate –40°C ≤ T_A ≤ +85°C; unless noted otherwise.
Parameter
Conditions
Min.
Typ.
Power Supply Input
Supply Voltage (V_IN)
1.6
V_IN = 5V; /MR0, /MR1, /RST, RSTP, and PDY
open
3.4
Supply Current (I_IN)
V_IN = 3V; /MR0, /MR1, /RST, RSTP, and PDY
open
2.9
Reset Time
PDY = Open
1.6
2.0
Set-Up Delay (t_SETUP)
Reset Timeout Delay (t_RESET)
PDY = 0V
PDY = V_IN
Option X
Option Y
3.2
4.0
4.8
6.0
140
220
240
350
Reset Outputs (/RST, RSTP)
Reset Output Voltage Low
(/RST Output and RSTP Output)
(V_OL)
V_IN = 4.5V, I_SINK = 3.2mA
V_IN = 3.3V, I_SINK = 2.5mA
V_IN = 1.6V, I_SINK = 1.0mA
Reset Output Voltage High
(RSTP Output) (V_OH)
/RST Output Leakage (I_LO)
V_IN = 4.5V, I_SOURCE = 0.8mA
V_IN = 2.7V, I_SOURCE = 0.5mA
V_IN = 1.6V, I_SOURCE = 250μA
V_/RST = 5.5V
0.8 × VIN
0.8 × VIN
0.8 × VIN
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5kΩ in series with 100pF.
4. Specification for packaged product only.
Max.
Units
5.5
V
7.5
µA
2.4
4.8
s
7.2
280
ms
480
0.3
0.3
V
0.3
V
0.3
μA
October 2011
4
M9999-102711-A