MIC2774_15 Datasheet, PDF (4/11 Pages) Micrel Semiconductor – Dual Micro-Power Low Voltage Supervisor

Micrel, Inc.
MIC2774
Absolute Maximum Ratings⁽⁶⁾
Supply Voltage (V_DD) .................................... –0.3V to +7.0V
Input Voltages (V_IN, V_/MR) ............................. –0.3V to +7.0V
Output Voltages (V_/RST, V_RST) ....................... –0.3V to +7.0V
RST, (/RST) Current ...................................................20mA
Storage Temperature (Ts).........................–65°C to +150°C
ESD Rating⁽⁸⁾............................................................... 1.5kV
Operating Ratings⁽⁷⁾
Supply Voltage (V_DD).................................... +1.5V to +5.5V
Input Voltages (V_IN, V_/MR) ............................. –0.3V to +6.0V
Output Voltages
V_/RST (N version) .................................... –0.3V to +6.0V
V_/RST, V_RST (H and L versions) .... –0.3V to V_DD to +0.3V
Ambient Temperature (T_A) .......................... –40°C to +85°C
Package Thermal Resistance (θ_JA) ........................256°C/W
Electrical Characteristics⁽⁹⁾
Note 10; TA = +25°C, bold values indicate –40°C≤ TA ≤ +85°C, unless noted.
Symbol Parameter
Condition
Min. Typ.
IDD
Supply Current
VDD = VIN = VTH + 1.6%;
Note 10; /MR, RST, /RST open
3.5
VDD Voltage Threshold
Undervoltage Threshold on VDD
(See Standard Voltage Options
table)
VTH-
1.5%
VTH
VHYST
Hysteresis Voltage
1
IN, Undervoltage Detector Input
VREF
VHYST
Undervoltage Threshold
Hysteresis Voltage
IIN
Input Current
RST, /RST Outputs
Note 10
TMIN ≤ TA ≤ TMAX
295 300
3
5
tPROP
Propagation Delay
VIN = (VREF(MAX) + 100mV) to
VIN = (VREF(MIN) – 100mV), /MR = open
20
tRST
Reset Pulse Width
TMIN ≤ TA ≤ TMAX
140
VOL
RST or /RST Output Voltage
Low
ISINK = 1.6mA; VDD ≥ 1.6V
ISINK = 100µA; VDD ≥ 1.2V; Note 11
ISOURCE = 500µA; VDD ≥ 1.5V
VOH
RST or /RST Output Voltage
High (H and L versions)
ISOURCE = 10µA; VDD ≥ 1.2V; Note 11
0.8 ×
VDD
0.8 ×
VDD
Notes:
6. Exceeding the absolute maximum ratings may damage the device.
7. The device is not guaranteed to function outside its operating ratings.
8. Devices are ESD sensitive. Handling precautions are recommended. Human body model, 1.5kΩ in series with 100pF.
9. Specification for packaged product only
10. VDD equals nominal “Typical Application (VDD)” as shown in the Standard Voltage Options table.
11. VDD operating range is 1.5V to 5.5V. Output is guaranteed to be asserted down to VDD = 1.2V.
Max.
VTH+
1.5%
305
10
280
0.3
0.3
Units
µA
V
%
mV
mV
pA
nA
µs
ms
V
V
V
V
March 16, 2015
4
Revision 2.0