MIC2560 Datasheet, PDF (4/12 Pages) Micrel Semiconductor – PCMCIA Card Socket VCC and VPP Switching Matrix

MIC2560
Symbol
Parameter
Power Supply
I_CC5
V_CC5 IN Supply Current
I_CC3
V_CC3 IN Supply Current
I_PP IN
V_CC5 IN
V_CC3 IN
V_{PP IN}
V_PP IN Supply Current
(I_{PP OUT} = 0)
Operating Input Voltage
Operating Input Voltage
Operating Input Voltage
Conditions
I_{CC OUT} = 0
V_{CC OUT} = 5V or 3.3V, I_{CC OUT} = 0
V_{CC OUT} = hi-Z (Sleep mode)
V_CC active, V_{PP OUT} = 5V or 3.3V
V_{PP OUT} = hi-Z, 0 or V_PP
V_CC5 IN ≥ V_CC3 IN
V_CC3 IN ≤ V_CC5 IN
Micrel
Min Typ Max Units
0.01 10
µA
30
50
µA
0.01 10
µA
15
50
µA
0.01 10
µA
V_CC3 IN 5.0
6
V
2.8
3.3 V_CC5 IN V
8.0 12.0 14.5
V
Suspend Mode (Note 4)
I_CC3
Active Mode Current
V_{PP IN} = 0V, V_CC5 = V_CC3 = 3.3V
V_CC3 = enabled
V_PP = disabled (hi-Z or 0V)
30
µA
R_ON V_CC
V_{CC OUT} R_ON
V_{PP IN} = 0V, V_CC5 = V_CC3 = 3.3V
V_CC3 = enabled
V_PP = disabled (hi-Z or 0V)
4.5
Ω
Note 1.
Note 2.
Note 3.
Note 4.
Functional operation above the absolute maximum stress ratings is not implied.
Static-sensitive device. Store only in conductive containers. Handling personnel and equipment should be grounded to prevent damage from
static discharge.
Leakage current after 1,000 hours at 125°C may increase up to five times the initial limit.
Suspend mode is a pseudo-power-down mode the MIC2560 automatically allows when V_{PP IN} = 0V, V_PP OUT is deselected, and V_CC OUT =
3.3V is selected. Under these conditions, the MIC2560 functions in a reduced capacity mode where V_CC output of 3.3V is allowed, but at
lower current levels (higher switch on-resistance).
MIC2560
4
November 1999