KSZ8001L Datasheet, PDF (35/46 Pages) Micrel Semiconductor – 1.8C, 3.3V 10/100BASE-T/TX/FX Physical Layer Transceiver

Micrel
KSZ8001
10BASE-T Transmit (measured differentially after 1:1 transformer)
VP
Peak Differential Ouput
Voltage
50Ω from each output to VDD
2.2
VIMB
Output Voltage Imbalance
tr, tt
Rise/Fall Time
Clock Outputs
50Ω from each output to VDD
X1, X2 Crystal Oscillator
RXC100
RXC10
Receive Clock, 100TX
Receive Clock, 10T
Receive Clock Jitter
TXC100
TXC10
Transmit Clock, 100TX
Transmit Clock, 10T
Transmit Clock Jitter
2.8
V
±3.5
ns
25
ns
25
MHz
25
MHz
2.5
MHz
3.0
ns(pk-pk)
25
MHz
2.5
MHz
1.8
ns(pk-pk)
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Exceeding the absolute rating(s) may cause permanent damage to the device. Operating at maximum conditions for extended
periods may affect device reliability.
This device is not guaranteed to operate beyond its specified operating rating. Unused inputs must always be tied to an
appropriate logic voltage level (Ground to VDD).
No HS (heat spreader) in package.
Specification for packaged product only.
100% data transmission in full-duplex mode and minimum IPG with 130-meter cable.
June 2009
Revision 1.04
35