SY89323L Datasheet, PDF (3/5 Pages) Micrel Semiconductor – 3.3V DUAL DIFFERENTIAL LVPECL TO LVTTL TRASLATOR

Micrel
Precision Edge™
SY89323L
Absolute Maximum Ratings^{(Note 1)}
Supply Voltage (V_CC) .................................. –0.5V to +3.8V
Input Voltage (V_IN) ......................................... –0.5V to V_CC
LVPECL Output Current (I_OUT)
Continuous ............................................................. 50mA
Surge .................................................................... 100mA
Input Current
Source or sink current on IN, /IN .......................... ±50mA
Lead Temperature (soldering, 10 sec.) ................... +220°C
Storage Temperature (T_S) ....................... –65°C to +150°C
Operating Ratings^{(Note 2)}
Supply Voltage (V_CC) ...................................... 3.0V to 3.6V
Ambient Temperature (T_A) ......................... –40°C to +85°C
Package Thermal Resistance, Note 3
MLF™ (θ_JA)
Still-Air ................................................................. 93°C/W
500lfpm ............................................................... 87°C/W
MLF™ (Ψ_JB)
Junction-to-Board ................................................ 60°C/W
Note 1.
Note 2.
Note 3.
Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation
is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM
RATlNG conditions for extended periods may affect device reliability.
The data sheet limits are not guaranteed if the device is operated beyond the operating ratings.
Package thermal resistance assumes exposed pad is soldered (or equivalent) to the devices most negative potential on the PCB.
LVTTL DC ELECTRICAL CHARACTERISTICS
T_A = –40^oC to +85°C, unless otherwise noted.
Symbol
Parameter
Condition
V_OH
Output HIGH Voltage
I_OH = –3.0mA
V_OL
Output LOW Voltage
I_OL = 24mA
I_CC
Power Supply Current
I_OS
Output Short Circuit Current
V_OUT = 0V
Min Typ Max Units
2.0
—
—
V
—
—
0.5
V
—
—
30
mA
–80
— –240 mA
LVPECL DC ELECTRICAL CHARACTERISTICS
V_CC = +3.3V±10%; T_A = –40^oC to +85°C, unless otherwise noted.
Symbol
Parameter
Condition
V_IH
V_IL
V_IHCMR
V_PP
I_IH
I_IL
Input HIGH Voltage
Input LOW Voltage
Input HIGH Common Mode Range
Minimum Peak-to-Peak Input
Input HIGH Current
Input LOW Current
IN
/IN
Note 4
Note 4. V_IHCMR (min) varies 1:1 with V_EE, max varies 1:1 with V_CC.
Min
Typ
Max Units
V_CC–1.230 – V_CC–0.735 V
V_CC–1.950 – V_CC–1.475 V
V_EE+1.5
–
V_CC
V
200
mV
–
–
150
µA
0.5
–
–
µA
–300
–
–
µA
3