English
Language : 

SY100S834_06 Datasheet, PDF (3/5 Pages) Micrel Semiconductor – (÷1, ÷2, ÷4) OR (÷2, ÷4, ÷8) CLOCK GENERATION CHIP
◁
Micrel, Inc.
Precision Edge®
SY100S834
SY100S834L
DC ELECTRICAL CHARACTERISTICS(1)
VEE = VEE (Min.) to VEE (Max.); VCC = GND
Symbol
Parameter
TA = –40°C
TA = 0°C
TA = +25°C
TA = +85°C
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
IEE
Power Supply Current
— — 49 — — 49 — — 49 — — 54 mA
VBB
Output Reference Voltage -1.38 — -1.26 -1.38 — -1.26 -1.38 — -1.26 -1.38 — -1.26 V
IIH
Input HIGH Current
— — 150 — — 150 — — 150 — — 150 µA
Note:
1. Parametric values specified at:
5 volt Power Supply Range 100S834 Series: -4.2V to -5.5V.
3 volt Power Supply Range 100S834L Series -3.0V to -3.8V.
AC ELECTRICAL CHARACTERISTICS(1)
VEE = VEE (Min.) to VEE (Max.); VCC = GND
Symbol
Parameter
TA = –40°C
TA = 0°C
TA = +25°C
TA = +85°C
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
tPLH
tPHL
tskew
tS
Propagation Delay CLK 960 1100 1200 960 1100 1200 960 1100 1200 960 1100 1200 ps
to Output
MR 650 800 1010 650 800 1010 650 800 1010 650 800 1010
Within-Device Skew(2)
— — 50 — — 50 — — 50 — — 50 ps
Set-up Time EN
400 — — 400 — — 400 — — 400 — — ps
tH
Hold Time EN
200 — — 200 — — 200 — — 200 — — ps
VPP
VCMR
Minimum Input Swing
250 —
Common Mode Range(3)
CLK –1.3 —
— 250
–0.4 –1.4
— — 250 —
— –0.4 –1.4 —
— 250 — — mV
–0.4 –1.4 — –0.4 V
tr
Output Rise/Fall Times 275 400 525 275 400 525 275 400 525 275 400 525 ps
tf
Q (20% – 80%)
Notes:
1. Parametric values specified at:
5 volt Power Supply Range 100S834 Series: -4.2V to -5.5V.
3 volt Power Supply Range 100S834L Series -3.0V to -3.8V.
2. Within-Device Skew is specified for identical transition.
3. The CMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified
range and the peak-to-peak voltage lies between VPP min. and 1V. The lower end of the CMR range varies 1:1 with VEE. The numbers in the spec table
assume a nominal VEE = –3.3V. Note for PECL operation, the VCMR (min) will be fixed at 3.3V – IVCMR (min)I.
M9999-032206
hbwhelp@micrel.com or (408) 955-1690
3
 ▷