MIC5355 Datasheet, PDF (3/18 Pages) Micrel Semiconductor – Dual 500mA μCap Low Dropout, Micropower Linear Regulator

Micrel, Inc.
MIC5355/6
Absolute Maximum Ratings⁽¹⁾
Supply Voltage (V_IN) ........................................ –0.3V to +6V
Enable Voltage (V_EN1, V_EN2). ....................–0.3V to
Power Dissipation (P_D) ........................... Internally
VL_{IiNm+it0e.d3(}V₃₎
Lead Temperature (soldering, 10sec.)....................... 260°C
Junction Temperature (T_J) ........................–40°C to +125°C
SEStoDraRgeatTinegm₍₄p_{)..e..r.a..t.u..r.e...(.T..s..)....................................................–..6.} 5E°SCDtoSe+n1s5i0ti°vCe
Operating Ratings⁽²⁾
Supply Voltage (V_IN)....................................... +2.5V to 5.5V
Enable Voltage (V_EN1, V_EN2). ................................... 0V to V_IN
Junction Temperature (T_J) ........................ –40°C to +125°C
Junction Thermal Resistance
8-Pin ePad MSOP (θ_JA)..................................64.4°C/W
8-Pin ePad 3mm x 3mm MLF^® (θ_JA)..................61°C/W
Electrical Characteristics⁽⁵⁾
V_IN = V_EN1 = V_EN2 = V_OUT +1V; higher of the two outputs; I_OUTLDO1 = I_OUTLDO2 = 100µA; C_OUT1 = C_OUT2= 2.2 µF; T_J = +25C,
bold values indicate –40°C to +125°C, unless noted.
Parameter
Condition
Min. Typ. Max. Units
Output Voltage Accuracy
Line Regulation
Load Regulation
Dropout Voltage
Ground Pin Current
Shutdown Current
Ripple Rejection
Current Limit
Output Voltage Noise
Auto-Discharge NFET
Resistance
Variation from nominal V_OUT
Variation from nominal V_OUT
V_IN = V_OUT + 1V to 5.5V, I_OUT = 100µA
I_OUT = 100µA to 500mA
I_OUT = 50mA
I_OUT = 500mA
V_EN1 = High; V_EN2 = Low; I_OUT1 = 0mA
V_EN1 = Low; V_EN2 = High; I_OUT2 = 0mA
V_EN1 = V_EN2 = High; I_OUT1 = I_OUT2 = 0mA
V_EN1 = High; V_EN2 = Low; I_OUT1 = 500mA
V_EN1 = Low; V_EN2 = High; I_OUT2 = 500mA
V_EN1 = V_EN2 = High; I_OUT1 = I_OUT2 = 500mA
V_EN1 = V_EN2 0.2V
f = 1kHz; C_OUT = 2.2µF; I_OUT = 250mA
V_OUT = 0V
C_OUT = 2.2µF, 10Hz to 100kHz
MIC5356 only; V_EN1 = V_EN2 = 0V; V_IN = 3.6V; I_OUT = 3mA
2.0
+2.0
%
3.0
+3.0
0.02
0.3
%/V
0.3
1
%
40
100
mV
350
800
38
53
38
53
70
100
µA
55
90
55
90
105
200
0.05
1
µA
60
dB
525 750 1050
mA
146
µV_RMS
30
Ω
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. The maximum allowable power dissipation of any T_A (ambient temperature) is P_D(MAX) = (T_J(MAX)  T_A) / _JA. Exceeding the maximum allowable power
dissipation will result in excessive die temperature and the register will go into thermal shutdown.
4. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5kΩ in series with 100pF.
5. Specification for packaged product only.
March 2012
3
M9999-031512-A