MIC4120_10 Datasheet, PDF (3/10 Pages) Micrel Semiconductor – 6A-Peak Low-Side Mosfet Driver Bipolar/CMOS/DMOS Process

MIC4120/4129
Absolute Maximum Ratings (Notes 1, 2 and 3)
Supply Voltage............................................................24V
Input Voltage................................ V_S + 0.3V to GND – 5V
Input Current (V_IN > V_S)........................................... 50mA
Storage Temperature............................. –65°C to +150°C
Lead Temperature (10 sec.).................................... 300°C
ESD Rating, Note 4
Micrel, Inc.
Operating Ratings
Supply Voltage............................................... 4.5V to 20V
Junction Temperature............................ –40°C to +125°C
Package Thermal Resistance
3x3 MLF™ (q_JA)................................................60°C/W
EPAD SOIC-8 (q_JA)...........................................58°C/W
Electrical Characteristics: (T_A = 25°C with 4.5V ≤ V_S ≤ 20V unless otherwise specified. Note 3.) Input Voltage slew rate
>1V/µs
Symbol Parameter
Conditions
Min
Typ
Max Units
INPUT
V_IH
Logic 1 Input Voltage
2.4
1.9
V
V_IL
Logic 0 Input Voltage
1.5
0.8
V
V_IN
Input Voltage Range
–5
V_S + 0.3 V
I_IN
Input Current
0 V ≤ V_IN ≤ V_S
–10
10
µA
Output
V_OH
High Output Voltage
V_OL
Low Output Voltage
R_O
Output Resistance,
Output Low
See Figure 1
V_S–0.025
V
See Figure 1
0.025 V
I_OUT = 10 mA, V_S = 20 V
1.4
5
Ω
R_O
Output Resistance,
Output High
I_OUT = 10 mA, V_S = 20 V
1.5
5
Ω
I_PK
Peak Output Current
V_S = 20 V (See Figure 6)
6
A
I_R
Latch-Up Protection
Withstand Reverse Current
200
mA
Switching Time
t_R
Rise Time
Test Figure 1, C_L = 2200 pF
12

30
ns
35
ns
t_F
Fall Time
Test Figure 1, C_L = 2200 pF
13

30
ns
35
ns
t_D1
Delay Time
Test Figure 1
45

75
ns
100
ns
t_D2
Delay Time
Test Figure 1
50

75
ns
100
ns
POWER SUPPLY
I_S
Power Supply Current

V_IN = 3 V
V_IN = 0 V
0.45
3
mA
60
400
µA
V_S
Operating Input Voltage
4.5
20
V
Notes:
1. Functional operation above the absolute maximum stress ratings is not implied.
2. Static-sensitive device. Store only in conductive containers. Handling personnel and equipment should be grounded to prevent
damage from static discharge.
3. Specification for packaged product only.
4. Devices are ESD sensitive. Handling precautions recommended. Human body model: 1.5kΩ in series with 100pF.
July 2010
3
M9999-072010