MIC2545A_04 Datasheet, PDF (3/16 Pages) Micrel Semiconductor – Programmable Current Limit High-Side Switch

MIC2545A/2549A
Pin Description
Pin Number
SOP, DIP
1
Pin Number
TSSOP
1
2
3
3
5
4
7
5, 7
8, 12
6, 8
10, 14
2,4,6,9,11,13
Pin Name
EN
FLG
GND
ILIM
IN
OUT
NC
Micrel
Pin Function
Enable (Input): Logic-compatible enable input (-1 version is active high, -2
version is active low). High input >1.8V typical; low input <1.4V typical.
Do not float.
MIC2549A only: Also resets thermal shutdown latch.
Fault Flag (Output): Active-low, open-drain output. Indicates overcurrent or
thermal shutdown.
MIC2549A only: Latched low on thermal shutdown.
Ground: Supply return.
Current Limit: Sets current limit threshold using an external resistor (R_SET)
connected to ground. 76.8Ω < R_SET < 459Ω.
Supply Input: Output MOSFET drain. Also powers internal circuitry. Both IN
pins must be externally connected together.
Switch Output: Output MOSFET source. Both OUT pins must be externally
connected together.
Not internally connected
April 2004
3
M9999-041204