MIC23163 Datasheet, PDF (3/19 Pages) Micrel Semiconductor – 4MHz, 2A, 100% Duty Cycle Buck Regulator with HyperLight Load® and Power Good

Micrel, Inc.
MIC23163/4
Absolute Maximum Ratings⁽³⁾
Supply Voltage (V_AVIN, V_PVIN) ............................. −0.3V to 6V
Power Good Voltage (V_PG) ................................ −0.3V to 6V
Output Switch Voltage (V_SW) ............................. −0.3V to 6V
Enable Input Voltage (V_EN)................................−0.3V to V_IN
Junction Temperature (T_J) ....................................... +150°C
Storage Temperature Range (T_S) ............. −65°C to +150°C
Lead Temperature (soldering, 10s)............................ 260°C
ESD Rating⁽⁵⁾................................................. ESD Sensitive
Operating Ratings⁽⁴⁾
Supply Voltage (V_AVIN, V_PVIN)............................ 2.7V to 5.5V
Enable Input Voltage (V_EN) .. ……………………….0V to V_IN
Feedback Voltage (V_FB) ...................................... 0.7V to V_IN
Junction Temperature Range (T_J).. ….−40°C ≤ T_J ≤ +125°C
Thermal Resistance
2mm x 2mm Thin DFN -10 (θ_JA) ......................... 90°C/W
2mm x 2mm Thin DFN -10 (θ_JC).........................45°C/W
Electrical Characteristics⁽⁶⁾
TA = 25°C; VIN = VEN = 3.6V; L = 0.47µH; COUT = 10µF unless otherwise specified. Bold values indicate –40°C ≤ TJ ≤ +125°C, unless
otherwise noted.
Parameter
Condition
Min.
Typ.
Max. Units
Supply Voltage Range
2.7
5.5
V
Undervoltage Lockout Threshold (Turn-On)
2.40
2.53
2.65
V
Undervoltage Lockout Hysteresis
75
mV
Quiescent Current
Shutdown Current
IOUT = 0mA , VSNS > 1.2 × VOUT Nominal
VEN = 0V; VIN = 5.5V
33
55
µA
0.1
5
µA
Output Voltage Accuracy
Feedback Regulation Voltage
VIN = 3.6V if VOUTNOM < 2.5V, ILOAD = 20mA
VIN = 4.5V if VOUTNOM ≥ 2.5V, ILOAD = 20mA
−2.5
+2.5
%
0.68
0.7
0.72
V
Current Limit
VSNS = 0.9*VOUTNOM
2.5
3.3
VIN = 3.6V to 5.5V if VOUTNOM < 2.5V, ILOAD = 20mA
Output Voltage Line Regulation
0.3
VIN = 4.5V to 5.5V if VOUTNOM ≥ 2.5V, ILOAD = 20mA
A
%/V
20mA < ILOAD < 500mA, VIN = 3.6V if VOUTNOM < 2.5V
0.3
20mA < ILOAD < 500mA, VIN = 5.0V if VOUTNOM ≥ 2.5V
Output Voltage Load Regulation
%
20mA < ILOAD < 1A, VIN = 3.6V if VOUTNOM < 2.5V
0.3
20mA < ILOAD < 1A, VIN = 5.0V if VOUTNOM ≥ 2.5V
PWM Switch ON-Resistance
ISW = 100mA PMOS
ISW = −100mA NMOS
0.13
0.13
Ω
Switching Frequency
IOUT = 120mA
4
MHz
Soft-Start Time
VOUT = 90%, CSS = 1nF
1000
µs
Soft-Start Current
VSS = 0V
2.2
µA
Power Good Threshold (Rising)
% of VNOM
85
90
95
%
Notes:
3. Exceeding the absolute maximum ratings may damage the device.
4. The device is not guaranteed to function outside its operating ratings.
5. Devices are ESD sensitive. Handling precautions are recommended. Human body model, 1.5kΩ in series with 100pF.
6. Specification for packaged product only.
July 29, 2013
3
Revision 2.0