MIC2095_11 Datasheet, PDF (21/25 Pages) Micrel Semiconductor – Current-Limiting Power Distribution Switches

Micrel, Inc.
Evaluation Board Schematic
MIC2095/97/98/99
Figure 10. Schematic of MIC209X Evaluation Board
Notes:
1. Evaluation board is used for all parts.
2. Part numbering scheme is 209X-Y where X is the place holder for the last number (i.e. MIC2095, MIC2097, MIC2098 or MIC2099) and Y is the
polarity of the enable signal (-1 indicates active high logic and -2 indicates active low logic).
3. MIC209X-1 EN pin only requires R4 (pull-up resistor to V_IN) to enable the output without an external enable signal.
4. MIC209X-2 EN/ pin only requires R3 (pull-down resistor-to-GND) to enable the output without an external enable signal.
5. R1 is NF (no fill) with the MIC2095 (fixed current limit).
August 2011
21
M9999-080211-C