MIC5060_10 Datasheet, PDF (2/12 Pages) Micrel Semiconductor – Ultra Small High-Side MOSFET Driver

Micrel, Inc.
MIC5060
Ordering Information^{(1, 2)}
Part Number
MIC5060YML
Marking Code
MIC5060
Temperature Range
-40°C to +85°C
Configuration
Non-Inverting
Package
8-pin 3mm x 3mm MLF^®
Note:
1. Pin 1 identifier symbol is “•”.
2. MLF^® is a Green RoHS-compliant package. Lead finish is NiPdAu. Mold compound is Halogen free.
Pin Configuration
8-Pin (3mm x 3mm) MLF^® (ML)
Top View
Pin Description
Pin Number
1
2
3
4
5
6, 7, 8
Pin Name
V+
Input
Source
Ground
Gate
NC
Pin Function
Supply. Must be decoupled to isolate from large transients caused by the power MOSFET
drain. 10µF is recommended close to pins 1 and 4.
Turns on power MOSFET when taken above (or below) threshold (1.0V typical). Pin 2
requires ~ 1µA to switch.
Connects to source lead of power MOSFET and is the return for the gate clamp zener.
Pin 3 can safely swing to –20V when turning off inductive loads.
Ground.
Drives and clamps the gate of the power MOSFET.
Not internally connected.
February 2010
2
M9999-021610-C