MIC4830_09 Datasheet, PDF (2/12 Pages) Micrel Semiconductor – Low Noise 180VPP EL Driver

Micrel
MIC4830
Ordering Information
Part Number
MIC4830YML
Junction Temp. Range
–40° to +85°C
Package
8-Pin 3mm × 3mm MLF^®
Lead Finish
RoHS-Compliant / Pb-Free / Halogen Free*
MIC4830YMM
–40° to +85°C
8-Pin MSOP
RoHS-Compliant / Pb-Free
Note
*MLF^® is a GREEN RoHS-compliant package. Lead finish is NiPdAu. Mold compound is Halogen Free.
Pin Configuration
8-Pin MSOP (MM)
8-Pin 3mm × 3mm MLF^® (ML)
Pin Description
Pin Number
1
2
3
4
5
6
7
8
Pin Name
VDD
RSW
REL
GND
SW
CS
VB
VA
Pin Function
Supply (Input): 1.8V to 5.5V for internal circuitry.
Switch Resistor (External Component): Set switch frequency of the internal
power MOSFET by connecting an external resistor to VDD. Connecting the
external resistor to GND disables the switch oscillator and shuts down the
device.
EL Resistor (External Component): Set EL frequency of the internal H-bridge
driver by connecting an external resistor to VDD. Connecting the external
resistor to GND disables the EL oscillator.
Ground.
Switch Node (Input): Internal high-voltage power MOSFET drain.
Regulated Boost Output (External Component): Connect to the output capacitor
of the boost regulator and connect to the cathode of the diode.
EL Output: Connect to one end of the EL lamp. Polarity is not important.
EL Output: Connect to one end of the EL lamp. Polarity is not important.
July 2009
2
M9999-070709-C