MIC35302 Datasheet, PDF (2/8 Pages) Micrel Semiconductor – 3A, Low Voltage μCap LDO Regulator

Micrel, Inc.
Ordering Information
Part Number
Output Current
Voltage
MIC35302WD*
3A
Adjustable
Note:
* RoHS compliant with ‘high-melting solder’ exemption.
Junction Temp. Range(1)
–40° to +125°C
MIC35302
Package
5-Pin TO-252
Pin Configuration
5-Pin TO-252 D-Pak (D)
Pin Description
Pin Number
Pin Name
Pin Function
1
EN
Enable (Input): CMOS compatible input.
Logic high = enable, logic low = shutdown.
2
IN
Input Voltage: Supplies the current to the output power device
3
GND, TAB Ground: TAB is also connected internally to the IC’s ground on D-PAK.
4
OUT
Regulator Output: The output voltage is set by the resistor divider
connected from OUT to GND (with the divided connection tied to ADJ).
A minimum value capacitor must be used to maintain stability. See
Functional Description Information.
5
ADJ
Adjustable Regulator Feedback Input: Connect to the resistor voltage
divider that is placed from OUT to GND in order to set the output
voltage.
October 2009
2
M9999-102309-A